$41.44 |
13% OFF Phone Price : $47.44
CONFIRM THE PART FITS
Part Information
This clutch cable (part number 579856MA) is for snowblowers.
Clutch cable 579856MA connects the control lever to the clutch in the drive system in the snowblower.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #F2814-000 Canadiana gas snowblower | F2814-000 | 10 hp motor mount assembly |
| Model #F2350-000 Canadiana gas snowblower | F2350-000 | Motor mount assembly |
| Model #F2484-010 Signature gas snowblower | F2484-010 | Motor mount assembly |
| Model #DP-826-E Signature gas snowblower | DP-826-E | Motor mount assembly |
| Model #DY-824-1 Signature gas snowblower | DY-824-1 | 8 and 10 h.p. motor mount assy. |
| Model #F2814-000 Signature gas snowblower | F2814-000 | 10 hp motor mount assembly |
| Model #F2350-000 Signature gas snowblower | F2350-000 | Motor mount assembly |
| Model #88418 Craftsman snowblower | 88418 | 10 hp motor mount assembly |
| Model #88426 Craftsman snowblower | 88426 | Motor mount assembly |
| Model #88427 Craftsman snowblower | 88427 | 8 and 10 h.p. motor mount assy. |
Reviews
Perfect fit!
Fits just like the original so all is good. Easy to install after modifying the housing to remove the broken one.
Willie L L, Kennewick, WA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Pain to install but right product
Poor design on craftsman's behalf (or whoever made the blower on craftsman behalf). No clearance between where it needs to be installed and the back panel of the machine. If the back panel was removable instead of being welding in would go much easier. Had to install in the upside position but it worked and doesn't fall out. Also, shipping cost more than the part, kind of ridiculous
JerS1976, Stevens Point, Wi
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Correct Part for old snowblower
Exact replacement part for my old Craftsman snowblower. Fit perfectly.
Joe0101, Mankato, MN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Not for beginners
To install the clutch cable i decided to drill a 1/2" hole thru case/frame directly above where the cable connects to the clutch arm. This made attaching the end of clutch cable to arm much simpler. I laid a large square fridge magnet inside housing to catch drill shavings. Feed cable thru hole to connect end of cable to arm then around pulley. You will have to remove the pulley to get cable around it.The only other option is to disassemble the back half of snowblower. Which i didn't feel like doing.
Machinist, Pa.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy and fast fix
Fast fix, only need three minutes to do with no missing parts
Racwood, Bangor,Maine
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
OT that easy to install
Took some time to install, didn't have a service manual but have original parts manual.
Sandi 2, Wasilla Alaska
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Part was as described. Good quality
Created my own method of installation. Could not remove shaft pin as described on YouTube, so I used my dremel to cut a 1 inch square window in the casing right above the cable attachment point. Snow blower is super old and I am no longer concerned with cosmetics. :-)
Hans, Minnesota
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
cable
requires a certain level mechanical ability and tools
tjenkinsjr, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours