CONFIRM THE PART FITS
Blade 302565
Part #302565
Part Information
This auger (part number 302565MA) is for snowblowers.
Auger 302565MA consists of rotating blades that collect snow and throw it from the auger housing and through the chute.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #G2130010 Signature gas snowblower | G2130010 | Auger and housing assembly |
| Model #G2134010 Signature gas snowblower | G2134010 | Auger and housing assembly |
| Model #536884431 Craftsman gas snowblower | 536884431 | Auger housing |
| Model #536884560 Craftsman snowblower | 536884560 | Auger housing |
| Model #G2134010 Canadiana gas snowblower | G2134010 | Auger and housing assembly |
| Model #G2130010 Canadiana gas snowblower | G2130010 | Auger and housing assembly |
| Model #G2130010 Dynamark gas snowblower | G2130010 | Auger and housing assembly |
| Model #G2134010 Dynamark gas snowblower | G2134010 | Auger and housing assembly |
| Model #536884430 Craftsman snowblower | 536884430 | Auger housing |
| Model #536885170 Craftsman gas snowblower | 536885170 | Auger housing |
Reviews
Easy to install and works great
After having my snowblower for 22 years , I needed to replace my rubber auger blades. Craftsman parts were available and fit perfectly on my model. It didn't take that long to replace them and my blower is back to working like it was brand new.
Gary711, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Although you will need a riveting gun. Was an easy job overall to remove and replace. About 25 mins
Trix, Grafton NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Super esay
Working with this site was super easy. It took just a few minutes to locate the parts I needed and had them ordered. Have used the site in the past and will use it again when I need parts.
Pap63, Aurora, CO
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
snowblower part
easy to install if you do not know how please read the directions. hubby instally it in less than 30 min
old r, mich
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Department augers
Simple process, using machine screws with lock nuts. Approx installation time 15 min's
Randy33, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
auger blades
I had to purchase rivets and a rivet gun to replace the auger blades. other manufactures have allen head bolts. after purchasing i found that the parts a 4 times the cost from other sources. there was no paper work explaining how to install. (this might be important for people that don't know what theyre doing)
dougie12354, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
snowblower blades
need a cut off wheel to cut off rivets and 24 bolts,nuts, and washers to put together
little b, michigan
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours