CONFIRM THE PART FITS
Lawn Tractor Axle Weldment 418168
Part #418168
Part Information
Basic Information
- Part Name: Lawn Tractor Axle Weldment
- Manufacturer: Husqvarna
- Category: Lawn Tractor Component
- Primary Function: The axle weldment connects the right and left spindle assemblies, enabling the turning mechanism of the lawn tractor.
Technical Specifications
- Dimensions: Length 21.50 in, Width 2.00 in, Height 4.00 in
Installation & Compatibility
- Installation Difficulty: Medium — requires proper alignment and securing of the spindle assemblies.
- Tools Required: Socket wrench set, Work gloves for hand protection
Additional Information
The Husqvarna Lawn Tractor Axle Weldment (part number 531171101) is essential for the steering functionality of your lawn tractor. It seamlessly connects the spindle assemblies, facilitating efficient and safe maneuverability.
Safety Tip: Always wear appropriate work gloves to safeguard your hands during installation. Ensure the tractor is on a stable surface and the engine is off before commencing replacement or maintenance work.
Replacement Note: This part replaces the former part number 418168. Ensure compatibility with your specific model by consulting the owner's manual or contacting a certified service professional. Regular maintenance checks can prevent premature wear and enhance the longevity of your lawn tractor's steering system.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #96042003604 Poulan front-engine lawn tractor | 96042003604 | Steering |
| Model #936042 Ariens front-engine lawn tractor | 936042 | Steering |
| Model #93604200 Ariens front-engine lawn tractor | 93604200 | Steering |
| Model #917253642 Craftsman front-engine lawn tractor | 917253642 | Steering |
| Model #A20BH42 (96046001100) Ariens front-engine lawn tractor | A20BH42 (96046001100) | Steering |
| Model #96046001100 Ariens front-engine lawn tractor | 96046001100 | Steering |
| Model #917253790 Craftsman front-engine lawn tractor | 917253790 | Steering |
| Model #917254032 Craftsman front-engine lawn tractor | 917254032 | Steering |
| Model #917254690 Craftsman front-engine lawn tractor | 917254690 | Steering |
| Model #917254691 Craftsman front-engine lawn tractor | 917254691 | Steering |
Reviews
Lawn tractor axle weldment
It appears to be a good quality part but it does not come with the center bushing and the old part has a molded bushing that cannot be removed
Mike, Tennessee
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Front axle for Craftsman LT1000 lawn tractor
I bought this axle to replace the 20 year old one on my mower that broke. This one is built similar to the original, the only difference is how it is welded at the spindles. Great price and I would have given it 5 stars had they did a better job on the weld beads at the spindle entrances on the ends. One of the right side welds was blown out and they never went back over it to get a good clean weld. They just painted it and called it good. One thing I want to mention is if you order this axle, it doesn't come with the plastic spacer bearing (part# 136518) or the steel inner spacer brace (part# 160367) where the main bolt goes through the front axle brace at the center axle hole pivot point. I used my old ones, but, if I did it again, I would just look up these part numbers and order new ones with the axle if they are available. Everything went together well and works well. Overall, great price and an almost exact replacement for my Craftsman LT1000.
Rob ., WI
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Fit Form Function
Redesign was better built than original and everything fit fine.
TS E C, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Good price for a new part
The part fit great. Getting the old pieces off only required a socket head for a 4+3 bolts and pliers to remove a few cotter pins and E-clips. A jack is required or you can lift it yourself and have someone slide a stand in place to hold it up. You probably will want to borrow/buy a grease gun for the new axle wear the tire rods go in. Some WD40 will work for a few hours.
S S, Lansdale, Pa
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Failure again!
The parts shown are not my last received part that was on backorder. I ordered a brake puck; but I received a black washer instead of the puck. Please send me what I ordered. Your records should show that this is the 2nd time I have ordered the brake puck...and the first time I ordered it, I received the same incorrect part (like this one) & had to reorder again.
Jack60, Danville, IL
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
100%
It was a little tough till got into it it's one bolt out then in after muffler taken off pre greased I think
Christopher o, Moulton Alabama
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend