CONFIRM THE PART FITS
Power Cord W10325328
Part #W10325328
Part Information
This power cord (part number W11545825) is for stand mixers.
Unplug the mixer before installing power cord W11545825. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #KSM150PSPT5 KitchenAid stand mixer | KSM150PSPT5 | Motor and control unit parts |
| Model #KSM85PBSL5 KitchenAid stand mixer | KSM85PBSL5 | Motor and control unit parts |
| Model #KSM150PSAC5 KitchenAid stand mixer | KSM150PSAC5 | Motor and control unit parts |
| Model #KSM150WPOB5 KitchenAid stand mixer | KSM150WPOB5 | Motor and control unit parts |
| Model #KSM150PSMS5 KitchenAid stand mixer | KSM150PSMS5 | Motor and control unit parts |
| Model #KSM154GBQ4LR5 KitchenAid stand mixer | KSM154GBQ4LR5 | Motor and control unit parts |
| Model #KSM150PSMC5 KitchenAid stand mixer | KSM150PSMC5 | Motor and control unit parts |
| Model #KSM150QXHY5 KitchenAid stand mixer | KSM150QXHY5 | Motor and control unit parts |
| Model #KSM85PBOB5 KitchenAid stand mixer | KSM85PBOB5 | Motor and control unit parts |
| Model #KSM150QXCU5 KitchenAid stand mixer | KSM150QXCU5 | Motor and control unit parts |
Reviews
Exact item. Easy install
It was easy to install. Took about 20 minutes to remove the old cable and install the new
Freelancer021, South Bend, Indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
No, most would send it back
This cord is suppose to fit the Elite Kenmore mixer. That is the one with the hole. It has ends on it and they must be removed and it will not fit through the hole that retains the cord for storage. What I did, rather then send back and wait for a long time is made it work. Cut ends, and Soldiered in place the Machine end. Then was able to use the screw down clip to hold the cord from extending to far. Now you will have to split where the cord is held in place as comes out of the machine and slide split over cord. Now when you put it back together it will work like before. You are now ready to use.
Lowell, Bellingham, WA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend