CONFIRM THE PART FITS
Adjuster Assembly 431142
Part #431142
Part Information
This height adjuster (part number 581497908) is for lawn mowers.
Height adjuster 581497908 moves the lawn mower wheel up or down to adjust the lawn mower deck to the desired cutting height.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $30.64
- $53.31
- $53.31
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #917370605 Craftsman gas walk-behind mower | 917370605 | Drive control/gear case/wheels |
Model #96122001200 Poulan gas walk-behind mower | 96122001200 | Drive control/gear case/wheels |
Model #PR65Y22SHP Poulan gas walk-behind mower | PR65Y22SHP | Drive control/gear case/wheels |
Model #96122001000 Poulan gas walk-behind mower | 96122001000 | Drive control/gear case/wheels |
Model #917375361 Husqvarna gas walk-behind mower | 917375361 | Drive control/gear case/wheels |
Model #96122000800 Southern States gas walk-behind mower | 96122000800 | Drive control/gear case/wheels |
Model #96122000700 Southern States gas walk-behind mower | 96122000700 | Drive control/gear case/wheels |
Model #SO5722SHP Southern States gas walk-behind mower | SO5722SHP | Drive control/gear case/wheels |
Model #SO5Y22SHP Southern States gas walk-behind mower | SO5Y22SHP | Drive control/gear case/wheels |
Model #SO65Y22SHP Southern States gas walk-behind mower | SO65Y22SHP | Drive control/gear case/wheels |
Reviews
wrong part
ordered right front height adjuster and received left front height adjuster. ordered right adjuster again
brad w, north MYRTLE beach
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Perfect part match
This part worked perfectly, but it wasn't easy to replace. The nuts holding it to the mower are in a very tight place and difficult to reach/turn. You can only turn each nut 1/6th turn at a time with an open end wrench, so you can't be impatient. The biggest challenge is getting the nuts started on the new studs. I used the open end wrench to hold the nut in place while pushing the stud all the way in. This used the partition behind the assembly to keep the nut in place long enough to remove the wrench and spin the nut with one finger until the threads caught. It was rather tricky.
Terry60, Grand Rapids, MI
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Lawn Mower Repair Parts
So far all parts I've received are very good replacements.
W. K J, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Lawn mower height adjuster
Was pretty easy to install. Took about 25mins. New part fit great.
leatherstom74, Indiana
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Moderate installation effort
If you need this part it is highly likely there are rusted parts which need to be removed. I replaced two and one was fairly easy, the other had rusted nuts which needed to be ground off. Not too hard with a 4 ' grinder.
Jim 2, Orange Park, Fl
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
wrong part pictured
The picture shows a left hand side adjuster. The description makes no mention re whether it's right or left. I assumed it was left. It was right. I ended up pulling out the bearing, which is what actually failed, and using my old parts from there, since I'd otherwise have spend around $20 in shipping to get the right part.. I see the picture is corrected. Moral: don't trust the picture.
abcdefghijkl, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Direct fit
Was very easy to install. It took less than 5 minutes.
Alwaysfixingsomething, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
The right part
It took about 10 minutes to install. I have a lawnmower again!
Dogbreath, Sludge Falls
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes