CONFIRM THE PART FITS
Line Trimmer Carburetor 545081825
Part #545081825
Part Information
Helpful DIY instructions: Installation guide.
This carburetor (part number 545081825) is for line trimmers.
Carburetor 545081825 mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Top models using the same part
Reviews
great replacement for my CM gas blower
This was a replacement carb for my Craftsman Gas Blower. It has an idle adjustment but no air/gas mixture needle which did initially cause me some concern. Except for the air/mixture adjustment the carb is an exact duplicate to the original. Took less than 15 minutes to install. The idle did was fine with the factory settings. The factory sealed air/mixture worked just fine. I followed the original manual starting instructions. and the engine started within 5 pulls and has run faultlessly ever since.
Chevy, California
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Correct parts
My first time ordering from Sears Craftsman. All my parts were available in stock. Shipping time was earlier than estimated. All parts fit exactly as the original. Engine started and ran great. I recommend Sears Craftsman.
Russell, Valdosta, GA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Installing carberator
Took 15 minutes to install. Not hard at all just need Allen wrench & screwdriver
Jackass1, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Wrong Part Supplied
Had the original part number from the Sears Owner's Manual. The substitute carburetor did not fit. Not even close! Wait for the refund as I had to return the product.
Jersey J, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
easy to install
20 min with allen wrench and a phillips screw driver
bobbe, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
R&R Carburetor
Original part number had been replaced with a new OEM carburetor and number and it fit perfectly. Leaf blower started right up with the power it use to have.
R.J.T., Lupton, Mi
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
exact replacement
5 min & I was done. Machine started right up & I put it to work.
oldraincrow, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes