CONFIRM THE PART FITS

Chainsaw Ignition Module 573992801

Part #573992801

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This ignition module (part number 573992801) is for chainsaws.

Ignition module 573992801 produces the voltage for the spark plug.

Let the engine cool before installing this part. Wear work gloves to protect your hands during this repair.

Reviews

Chainsaw no spark problem
April 14, 2019

First removed damaged parts, the coil and the magnet flywheel was damaged by loosening of the bolts over time, unbolted the coil and loosened nut on flywheel so I could put screwdriver under edge of fly wheel and tapping on nut slightly with hammer to break flywheel loose from shaft,make sure no threads are sticking above nut before hitting with hammer, reinstalled new parts making sure the key way and the key area of the flywheel line up, installed nut and tightened, installed coil and wire clip, the two areas of the coil that line up with flywheel should be spaced evenly and not touching each other, put covers back on and fired it up.

Ranger99, Enville, Tn

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour