CONFIRM THE PART FITS
Part Information
This recoil starter repair kit (part number 530071966) is for chainsaws.
Recoil starter repair kit 530071966 replaces the parts of the engine's recoil starter susceptible to normal wear. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #P4018AVBH TYPE 1 Poulan gas chainsaw | P4018AVBH TYPE 1 | Chassis/bar/handle |
Model #P3314 TYPE 1 Poulan gas chainsaw | P3314 TYPE 1 | Service reference |
Model #P3314WS TYPE 1 Poulan gas chainsaw | P3314WS TYPE 1 | Service reference |
Model #CS340 McCulloch gas chainsaw | CS340 | Starter |
Model #CS380 McCulloch gas chainsaw | CS380 | Starter |
Model #967027501 McCulloch gas chainsaw | 967027501 | Starter |
Model #967027401 McCulloch gas chainsaw | 967027401 | Starter |
Model #240 Husqvarna gas chainsaw | 240 | Eps starter |
Model #952802268 Husqvarna gas chainsaw | 952802268 | Eps starter |
Model #235E Husqvarna gas chainsaw | 235E | Eps starter |
Reviews
Chain saw starter kit
It works well to bad that sears had to move out of my area liked their stores
Rick E, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install.
Easy to install.took me about 15 minutes,just be carefull of the rewind spring in the housing.
James C, Columbia Ct
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Parts are what I ordered.
Part was standard type for the chain saw. No advise if you need advise then don't attempt to do it.
Buzzsaw, Redding CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Directions were great
Was easy to install and directions were great and price was right
Stumper, Perkasie pa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Relatively easy to install.
The basic starter repair kit probably would take first timers about 30 minutes. Note: go ahead and order "recoil starter hub spring" (part #576657801- for my chainsaw). If you let the spring itself uncoil, it is impossible to recoil the spring and insert it back into it's slot without the red plastic "holder/install guide" (my name for it) that the new spring comes in. My rating is based on NOT, NOT replacing "recoil starter hub spring)
Macprint, TN
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
easy to install
30 minutes i replaced everything involving the pull starter
john t b, lima ohio
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
they had new old stock for my old saw.
I thought I was going to throw away my old chainsaw. When I looked it up they had all the parts i needed to put it back together!
Jaxs, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
took too long to deliver and ship parts
the parts are easy to install, and the instructions are good and accurate
wsol8164, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes