Official Frigidaire gas lawn mower parts

Top replacement parts for Frigidaire gas walk-behind lawn mowers

• Carburetor rebuild kit. The carburetor rebuild kit includes gaskets, seals, a hinge pin and other components to refurbish the carburetor.
• Drive belt. The drive belt connects the engine pulley on the crankshaft to the pulley on the drive gear case. The gear case rotates the wheels to propel the mower.
• Ignition coil. Located next to the flywheel, the ignition coil generates electric current to fire the spark plug when flywheel magnets spin past the ignition coil. The ignition coil sends the electric current to the spark plug at the proper time to ignite the fuel in the cylinder.
• Starter rope. The starter rope is a heavy nylon cord that coils around the pulley of the recoil starter. The user pulls it to start the engine. The spring-loaded pulley on the recoil starter retracts the starter rope when the user releases it.

Replacing the spark plug in your Frigidaire gas walk-behind lawn mower

• When the engine is cool, disconnect the spark plug wire from the spark plug.
• Use a spark plug wrench to loosen and remove the spark plug.
• Use a spark plug gap tool to set the gap between the center electrode and the ground electrode. The gap specifications for your model are in the owner's manual.
• Thread the spark plug into the engine. Then tighten the spark plug with a spark plug wrench.
• Reconnect the spark plug wire and start the mower to make sure it runs.