Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Magic Chef Gas cooktops

Official Magic Chef gas cooktop parts

Magic Chef gas cooktops provide the cooking heat you need for stovetop dishes. Magic Chef gas cooktops use precision controls to control flame size so you can get the cooking results that you expect. When your Magic Chef gas cooktop isn't heating properly, find the repair parts you need to fix the problem at Sears PartsDirect.

Top repair parts for Magic Chef gas cooktops

  • Burner switch. The burner switch sends current to the igniter electrode to light the burner when you turn on a burner control valve.
  • Ignition module. The ignition module detects when you turn on a burner and sends the current to the igniter electrode to light the burner.
  • Wire harness. The wire harness connects electrical components inside the cooktop.
  • Power cord. The power cord supplies the cooktop with electrical current for spark ignition.

How to replace a bad igniter switch on your Magic Chef gas cooktop

  • Unplug the cooktop's power cord from the wall outlet and then close the gas supply shut-off valve.
  • Remove all the cooktop grates and then lift the gas burner caps off the burner heads. Remove the screws that hold the burner heads in place and then remove the burner heads.
  • Pull the control knobs off of the burner control valves. Remove the screws that secure the main top to the top of the burner orifice holders. Lift the main top off of the cooktop and set it aside.
  • Pull the spark igniter switch off of the burner control valve and disconnect its wires.
  • Push the new igniter switch onto the stem of the burner control valve and connect the wires.
  • Position the main top on top of the burner orifice holders. Insert and tighten the screws that secure the main top to the orifice holders. Push the control knobs on the burner control valves.
  • Position the burner heads in the correct locations, screw them into place and tighten the screws firmly. Cover the burner heads with the burner caps in the correct locations. Set the grates in place on the cooktop.
  • Plug the power cord into the wall outlet and open the gas shut-off valve.

Parts & More