Official Chamberlain storm & screen doors parts

Safety tips for your Chamberlain storm & screen door

• Properly install the storm & screen doors according to the installation guidelines provided in the owner's manual.
• Follow all safety warnings described in the owner's manual to use the door safely.
• Inspect the screen door regularly. Tighten any loose fasteners and replace any worn or broken parts.
• Use caution when installing or replacing tension springs to prevent injury.
• Wear work gloves to protect your hands when installing or repairing the door.

Replacing the screen on your Chamberlain storm & screen door

• Wear work gloves to protect your hands when replacing the screen.
• Remove the screws from the hinges and pull the door off the door opening frame. Lay the door down on a flat working surface.
• Remove the existing screen and its tensioning gasket.
• Clean the grooves for the tensioning gasket thoroughly.
• Cut the new screen material so it overlaps the screen frame by 1-inch on each side.
• Lay the screen material over the screen frame and push the tensioning gasket and screen into the tensioning gasket groove—properly tensioning the screen as you insert the tensioning gasket.
• Trim excess screening material from the sides of the screen frame,
• Reinstall the door on the door opening frame.