$86.50 |
6% OFF Phone Price : $92.50
Tips to find your model number
Product type
Select appliance
Model numbers typically look like this:
CONFIRM THE PART FITS
Refrigerator Door Gasket WR24X0445
Part #WR24X0445
Replaced by #WR24X445
?
Manufacturer substitution
This part replaces WR24X0445. Substitute parts can look different from the original.
Online Only Price
$90.60 |
6% OFF Phone Price : $96.60
In Stock
For ZIP codes near Edit
Part Information
Special details: Smooth folds and creases in gasket WR24X445 by soaking it in warm water or warming it with a hair dryer on low heat.
This freezer door gasket (part number WR24X445) is for refrigerators.
Freezer door gasket WR24X445 creates a seal around the door to prevent warm air from entering the freezer compartment.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $23.67 |20% OFF Phone Price : $29.67
- $24.04 |20% OFF Phone Price : $30.04
- $79.18 |7% OFF Phone Price : $85.18
- $7.09 |12% OFF Phone Price : $8.09
- $583.23 |$12.00 OFF Phone Price : $595.23
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #TBX21IABBRWW GE top-mount refrigerator | TBX21IABBRWW | Freezer door |
| Model #TBG21JADARWW GE top-mount refrigerator | TBG21JADARWW | Freezer door |
| Model #TBXW22RRERWH GE top-mount refrigerator | TBXW22RRERWH | All parts |
| Model #TBXW22RRELWH GE top-mount refrigerator | TBXW22RRELWH | All parts |
| Model #TBHW22RRELWH GE top-mount refrigerator | TBHW22RRELWH | All parts |
| Model #TBX22RPKRAD GE top-mount refrigerator | TBX22RPKRAD | All parts |
| Model #TBX22RPFLWH GE top-mount refrigerator | TBX22RPFLWH | All parts |
| Model #TBX22RPLLAD GE home | TBX22RPLLAD | All parts |
| Model #TBX22RPELWH GE top-mount refrigerator | TBX22RPELWH | All parts |
| Model #TBX22PRYGLWW GE top-mount refrigerator | TBX22PRYGLWW | Freezer door |
Reviews
Doesn't seal right
It never sealed and the bottom of the freezer still seeps out cold air
Dakota, Arizona
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Works Great
This fit perfectly. Removing the old seal was quite easy. The new seal was challenging to seat in the channel probably because the door was still attached (I was unable to remove the freezer door; the screws were simply too tight). Ultimately managed to get the seal set properly.
Jill, New Jersey
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Good fit and seal
This seal was fairly easy to install. Make sure you clean all surfaces before installing this new seal. Also make sure the corners are fitted. You'll need to push firmly to seat this seal. Go slow and take your time.
whatever, texas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend