$175.17 |
6% OFF Phone Price : $187.17
CONFIRM THE PART FITS
Part Information
This scraper blade (part number 55323MA) is for snowblowers.
Scraper blade 55323MA attaches to the bottom of the auger housing to protect the housing and augers.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $154.52 |7% OFF Phone Price : $166.52
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #536883200 Craftsman electric snowblower | 536883200 | Auger housing assembly |
| Model #G2130010 Signature gas snowblower | G2130010 | Auger and housing assembly |
| Model #G2134010 Signature gas snowblower | G2134010 | Auger and housing assembly |
| Model #536884210 Craftsman snowblower | 536884210 | Auger housing assembly |
| Model #536881410 Craftsman gas snowblower | 536881410 | Auger |
| Model #536884220 Craftsman gas snowblower | 536884220 | Auger housing assembly |
| Model #536884560 Craftsman snowblower | 536884560 | Auger housing |
| Model #536884230 Craftsman snowblower | 536884230 | Auger housing assembly |
| Model #G2134010 Canadiana gas snowblower | G2134010 | Auger and housing assembly |
| Model #G2130010 Canadiana gas snowblower | G2130010 | Auger and housing assembly |
Reviews
Easy to install
This was installed at the same time as the component it attached to. It was super easy.
Hawgleg, Coopersville, MI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very strong material
Rugged material which should last a long time, holes align properly
gunner44r, Rome, Pa
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Non-Matching part
The part does not match the original equipment on the snow blower. The original part is riveted to the auger, and the parts guide does not show rivets as an optional part. If the blade scrape is not actually replaceable, just list the auger with blade scrape already installed as the only option. If the proper fastening parts are not available and you use bolts this could cause premature wear out of auger bearings or bolts coming loose and causing damage to the snow blower or injury to the user or other personnel nearby.
Joseph, Hazlet, NJ
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Had some difficulties taking off the old blade
Wasn't easy taking off old blade, had to get a bolt cutter.
Sharon, Walker, Iowa
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
As advertised
This blade was exactly what I needed. It is a good fit. The delivery was quick, too.
Undisclosed, Massachusetts
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Ground off the old rivets and installed the blade
Easy to install it took the longest to find new bolts
Geno52, Belle Plaine, minn.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Not difficult to install
Had to drill out original equipment rivets that fastened the scraper, and replaced with 3/4 in bolts with lock nuts. Verified clearance with auger first!
DIY f t, Pittsburgh, PA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
snowblower blades
the job took around two hours , cut off old rivets put on new bolts and tightened
little b, michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours