CONFIRM THE PART FITS

Dishwasher External Drain Hose 5304483508

Part #5304483508

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This drain hose (part number 5304483508) is for dishwashers.

Drain hose 5304483508 carries drain water from the dishwasher to the drain.

Shut off the water supply and unplug the dishwasher before installing this part. Follow the instructions in the installation guide to correctly install the new drain hose. Wear work gloves to protect your hands during this repair.

Reviews

Installation was time consuming
November 12, 2020

Simple to install once I removed the back cover, the wooden top and the side cover. Did not remover the huge counterweight which made the installation more difficult. Also had to heat the end of the hose and use soap in order to get it installed.

LCJim, Fresno, CA

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Installing
September 16, 2020

Make sure you soak this hose in hot water before installing or it will never be pliable enough to push over fitting

Sw1506, Harvard, Illinois

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

OEM hose fit as expected, but expensive.
August 10, 2019

It's nice to still be able to find an original part for a 10 year old dishwasher. But even with 10% off coupon, it was $51.59 (including tax and shipping) for a HOSE! Installation was fairly straightforward...remove back panel, tilt wasker on it's left side, loosen hose clamp and pull off old hose. When you install the new hose, it helps to heat the end in hot water and jam a round metal rod in (I used a socket) to stretch the opening up so it slides over the fitting easily.

Robert10, San Francisco

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour