CONFIRM THE PART FITS

Microwave Keypad (replaces 8206635) WP8206635

Part #WP8206635

If you choose to purchase a new product, please visit www.sears.com

This item is currently unavailable for purchase. We are sorry for any inconvenience.

Part Information

This keypad (part number WP8206635) is for microwaves.

Keypad WP8206635 activates various settings and functions when you press one of the selection buttons.

Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.

Reviews

Microwave Keypad
December 19, 2022

Arrived quickly. The advice in the comments was correct, the part fixed the ghost beeping.

James, Missouri

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours
Don't try to take off the entire door!!
April 22, 2020

Lots of different ideas as how to change out this item on Kitchen aid KHMS2056sss2. My success was to remove the panel that holds the controls for vent fan and lights. You will probably need to remove the grease/air filter to reach the fan and light plugs as well as the wiring connected to the door. You will probably need help pulling the wiring bundle once the door panel is ready to be removed. Note there are two screw holding this side panel that can only be reached by having the door fully open. Removing this panel will give you access to the three screws on inside of door panel. There are three screws on inside and three on outside of door panel. There are also two under the door panel. Once you have all eight screws out take a putty knife and with door open push knife between the (black) inside panel and the silver outside (the one with the handle on it) once you have these two separated you can remove outer panel.Pull wiring bundle through the cutout and then you can lay it on a table to remove the cover (black plastic) to access the number/touch board. You will find it is connected to the control board all under this plastic cover. Turns out I need the control board (sort of square circuit board) and not touch board. They allowed me to return the touch panel and all is well with my microwave now.

Don M, Texas

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend