$114.79 |Â
9% OFFÂ Phone Price : $126.79
CONFIRM THE PART FITS
Freezer Door Gasket 216522309
Part #216522309
Replaced by #5304507200
?
Manufacturer substitution
This part replaces 216522309. Substitute parts can look different from the original.
Online Only Price
$118.88 |Â
9% OFFÂ Phone Price : $130.88
In Stock
For ZIP codes near Edit
This part fits
Part Information
Basic Information
- Part Name: Freezer Door Gasket
- Manufacturer: Frigidaire
- Category: Freezer Appliance Part
- Primary Function: Creates a seal around the freezer door to prevent warm air from entering, maintaining the freezer's temperature efficiency.
Technical Specifications
- Dimensions: Please refer to the manufacturer's official documentation or specifications for exact measurements.
- Material: High-quality, flexible rubber
Installation & Compatibility
- Installation Difficulty: Medium — Requires careful alignment and handling due to the flexible nature of the gasket.
- Tools Required: Work gloves, warm water or a hair dryer (on low heat) for smoothing the gasket
Additional Information
This door gasket (part number 5304507200) is designed for seamless integration into Frigidaire freezer models, replacing previous part numbers 216522309 and 5304507214. Over time, freezer door gaskets can become brittle or deformed, compromising freezer efficiency by allowing warm air to enter. Replacing a worn gasket with this Frigidaire freezer door gasket restores the efficient seal required to maintain optimal freezer performance.
Installation Tips:
- Before installation, safely store any perishable food items that could be adversely affected while the freezer is off. Unplug the freezer to ensure safety during installation. To achieve a perfect fit, smooth out folds and creases in the gasket by soaking it in warm water or gently warming it with a hair dryer on low heat. Always wear protective work gloves to safeguard your hands during installation.
Replacement Note:
This part replaces older models including part numbers 216522309 and 5304507214, ensuring a consistent and improved sealing performance.
Frequently Used Together
- $417.18 |Â$12.00 OFFÂ Phone Price : $429.18
- $60.21 |Â9% OFFÂ Phone Price : $66.21
- $362.44 |Â$12.00 OFFÂ Phone Price : $374.44
- $8.49 |Â11% OFFÂ Phone Price : $9.49
- $12.59 |Â14% OFFÂ Phone Price : $14.59
- $58.99 |Â9% OFFÂ Phone Price : $64.99
- $12.71 |Â14% OFFÂ Phone Price : $14.71
- $38.69 |Â13% OFFÂ Phone Price : $44.69
- $11.09 |Â15% OFFÂ Phone Price : $13.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #FFU17FC4CW2 Frigidaire upright freezer | FFU17FC4CW2 | Door |
| Model #FFU17FK1CW0 Frigidaire upright freezer | FFU17FK1CW0 | Door |
| Model #FFU1724DW3 Frigidaire upright freezer | FFU1724DW3 | Door |
| Model #CFU17M3HW0 Universal/Multiflex (Frigidaire) upright freezer | CFU17M3HW0 | Door |
| Model #MFU17F3GW8 Universal/Multiflex (Frigidaire) upright freezer | MFU17F3GW8 | Door |
| Model #CFU17F3AW2 Universal/Multiflex (Frigidaire) upright freezer | CFU17F3AW2 | Door |
| Model #MFU17M3GW3 Universal/Multiflex (Frigidaire) upright freezer | MFU17M3GW3 | Door |
| Model #CFU17F3AW3 Universal/Multiflex (Frigidaire) upright freezer | CFU17F3AW3 | Door |
| Model #MFU17M3GW1 Universal/Multiflex (Frigidaire) upright freezer | MFU17M3GW1 | Door |
| Model #WFU17FC4CW0 White-Westinghouse upright freezer | WFU17FC4CW0 | Door |
Reviews
Gasket manufactured incorrectly
The part you shipped me was manufactured incorrectly. One corner was twisted when it was heat welded and it is impossible to install. I noticed on the shipping box that this gasket was previously returned by someone in Biloxi, MS. You should not ship it to someone else but you should return it to the manufacturer in Mexico.
Home H, Augusta, GA
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Outdoor beverage fridge gasket. A must have in AZ
Got this for our 6 year old outdoor beverage fridge that sits in the AZ heat, covered outside. The old gasket was dry rotting even with yearly conditioning so the fridge contents were accumulating condensation. Worked like a charm after a little maneuvering and a little gasket sealer. Took about 30 minutes to install. Lots of screws! Tight as a drum now! Thanks!
Tami Q, AZ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Door gasket installation
Review uTube video before installing https://youtu.be/e8pa7lBVlm8
Chris, Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
The gasket had a kink in it from manufacturing.
Poor quality control, item had a kink in it. wouldn't lay flat to install.
ANdreaHB, Yuma, AZ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Great fit not difficult
It works great and is not difficult to change out bc it the old one. Easier if take the door off. Don't remove all the screws just loosen them. Took about an hour total.
RevCKay, Suwanee , GA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Good fit
Would fit better if it was cold when installing. While warm it was a loose fit on the door.
Rotor, AL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
More complicated than I anticipated.
Installing the door gasket was more complicated than I had anticipated. I thought it would be simply removing the old gasket and installing the new gasket, as I had done for refrigerator last summer. What I discovered was that this gasket is more secured to the door by screws around the door. So, I had to loosen the screws to try to work the lip of the gasket into the space. The top worked as expected. The sides were harder. When I got to the bottom, there was water dripping - apparently there was ice/frost built up inside the door, so I decided to wait to let the door thaw out and as much of the water as possible drain before continuing the installation. So, I removed everything from the freezer (these items did not have to be kept fully frozen), so I could wipe out the body of the freezer. After waiting for about an hour and a half or so, I was able to finish installing the gasket and confirming that it was all the way in around all edges and the bottom before turning the freezer back on. Overall, it took 4-5 hours to finish the job. Even though the job was more complicated than expected, I understand why this gasket is secured the way it is, since it's important for the gasket on a freezer to be reliably secured.
Fishin i H, Honolulu
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Boxed well.
Not quite easy to install. Took 2 people to hold, compress, screw into the area. Preformed corners made those fit well. One 2ft section seems crushed and isn't sealing though.
Lynnette, Spring Tx
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend