CONFIRM THE PART FITS

Range Hood Blower Assembly WB38X10168

Part #WB38X10168

Replaced by #WB26X28614
?
Manufacturer substitution
This part replaces WB38X10168. Substitute parts can look different from the original.
Online Only Price
$622.00
| 
$12.00 OFF Phone Price : $634.00
In Stock
For ZIP codes near Edit
60-day return policy 

Only ground shipment is available for this item.

This part fits

Part Information

This blower assembly (part number WB26X28614) is for range hoods.

Blower assembly WB26X28614 removes cooking grease and odors from the air. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Unplug the range hood or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Reviews

Ge kitchen hood blower motor
February 02, 2022

Sears had the best price and warranty. Part arrived well packaged. Installed and working fine til now ( 3 weeks )

Sheshu, San Ramon ca

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Range Hood Blower Assembly
December 17, 2021

It was easy to install taking about 30 minutes. First, you take out the noisy unit of assembly and wipe off all the grease inside of the range hood.

Hong48, Lynnwood, WA

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Unbelievable Price!
September 27, 2021

Super easy to install. Price was much cheaper than the other parts sites I shopped. Shipment arrived quickly. Highly recommend Sears Parts.

janenole, Florida

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Simple but Awkward to Install
September 21, 2021

Had to replace this after only 3 years! It is actually pretty easy to install this fan if the hood was not installed. Doing it in place you have to twist and lay your back over the stove. You have to remove the filters, then the bar that holds the filters in place. Then unplug the fan. It only fits one way so I marked the down side with a marker the marked the new one on the same side. The fan comes out with one bolt and is clipped in with a safety catch. Just release the catch after removing the bolt and jiggle the fan and it will swing down. It would help to have 2 more hands. The fan is pretty lite. Then put the new fan in the same way. Slide back into the rail then pivot up and the safety catch will hold the fan so you can install the bolt. Plug it in and test first. Then install the filter holder. That was the most time consuming since I could not easily line up the holder to the old holes. It looks like the installers drill them not the factory. Now you are done.

JackS, Portland or

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Perfect replacement part
September 14, 2021

Very easy to install the motors for our GE Profile exhaust vent. Took about 15 minutes to install, start to finish.

32459, L, Santa Rosa Beach, FL

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

CAUTION! Horrible Packing and Shipping Vendor!
August 01, 2021

BUYER BEWARE!!! Can't review the item because it arrived completely broken and unusable. I wouldn't know for sure but don't believe the part shipped in the condition received, and the carton was accepted because there was no apparent damage to it. However, there was no 'Fragile Item' sticker affixed to the box and the packing was ridiculously minimal at best for what it was, when opened. Considering the shipping cost, shipping timeline and the desperate need for the part, I wasn't willing to test the return/ exchange policy if it was going to arrive it this condition again. The metal assembly mounting bracket was bent out of square, one side of the plastic wire housing attachment posts to the fan box were broken off, both blower fan wheels were bound in their boxes, one blower fan wheel was busted into pieces, the other motor spindle jammed into the motor winding and unable to turn. Fortunately though, I had sufficient mechanical aptitude to build a working unit using the parts from the old and new units. Even though I was able to make a working unit in the end, overall, it was truly a disappointing experience and a test of patience having to literally build a unit instead of just bolting the new one in.

Competent M, Alaska

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Highly Recommend
May 17, 2020

I was very happy to see that Sears was still open and that I was able to obtain the blower motor for my Range Hood. I hope that Sears remains open for online orders even though the actual walk in stores are closing. I appreciated the diagrams provided for my Range Hood as it helped worth the Blower Motor installation. Thank you again and I would highly recommend Sears Parts online ordering for any of your home needs.

Yourpalrt, Riverside, CA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Range Hood Blower Assembly
May 03, 2020

Perfect fit, reasonable price. Easy to install. Operates quietly.

GE C, California

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend