$16.64
|Â 11% OFF Phone Price : $18.64
CONFIRM THE PART FITS
Part Information
Refrigerator condenser fan motor 4680JB1026H is an original equipment manufacturer (OEM) part that fits some Kenmore 795-series side-by-side refrigerators; it also fits some LG LSC26905- and LSC27910-series refrigerators.
Condenser fan motor 4680JB1026H turns the condenser fan blade to move air across the condenser coil.
Frequently Used Together
- $11.11|Â15% OFF Phone Price : $13.11
- $124.74|Â9% OFF Phone Price : $136.74
- $42.93|Â12% OFF Phone Price : $48.93
- $38.56|Â13% OFF Phone Price : $44.56
- $16.75|Â11% OFF Phone Price : $18.75
- $16.64|Â11% OFF Phone Price : $18.64
- $16.64|Â11% OFF Phone Price : $18.64
- $8.97
- $16.64|Â11% OFF Phone Price : $18.64
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LSC27910ST LG side-by-side refrigerator | LSC27910ST | Mechanical compartment |
| Model #LSC269905TT LG side-by-side refrigerator | LSC269905TT | Mechanical compartment parts |
| Model #LSC26905SB LG side-by-side refrigerator | LSC26905SB | Mechanical compartment parts |
| Model #LSC27910TT/00 LG side-by-side refrigerator | LSC27910TT/00 | Mechanical compartment |
| Model #LSC27910SW LG side-by-side refrigerator | LSC27910SW | Mechanical compartment |
| Model #LSC27910SB LG side-by-side refrigerator | LSC27910SB | Mechanical compartment |
| Model #79531006700 Kenmore side-by-side refrigerator | 79531006700 | Freezer asy |
| Model #79531002700 Kenmore side-by-side refrigerator | 79531002700 | Freezer compartment |
| Model #LSC26905TT/00 LG side-by-side refrigerator | LSC26905TT/00 | Mechanical compartment |
| Model #LSC26905SW LG side-by-side refrigerator | LSC26905SW | Mechanical compartment |
Reviews
Replace your condenser fan motor NOT REFRIGERATOR
Perfect fit very easy to replace. I have 13 years of experience in refrigeration. The LG refrigerator model LSC26905TT side by side has run nicely. Then I heard a chirp. I knew the condenser fan motor was going bad. Anyone can put a box fan in behind fridge until your part comes in just to keep your food from getting spoiled. Unplug refrigerator. Remove the screws holding your back plate on. Carefully lift up and flip it out of the way I used a magnet with a clip to hold it up out of my way. That way I did not have to disconnect my water line. Once that is out of the way remove screw holding drain in and remove it. Then remove screw holding fan housing in place. Pull fan blade off be careful not to break it. Follow wire to bottom of cabinet to see where it is plugged in and unplug. There are two clips on the bottom of the fan shroud depress carefully so as not to break them. (My tab broke but the clip that held shroud was still intact.) Slide fan shroud toward back toward side of fridge. Also slide center base back then up. The entire shroud will come out you need to ease the fan toward you then lean the whole in center toward the compressor and you will be able to sneak it by the post that ties the drain in place. Take your time and finesse it. The fan is inside the plastic case. remove and clean all of it. then reverse procedure. It was perfect working great and showed up very quickly. Ty.
Mary L, Claremont, NH
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Refrigerator condenser cooling fan motor.
It is very easy to install. All you have to do is remove the cover at the bottom back of the refrigerator,remove one screw from drainage pipe,remove the pipe.Remove one screw from the bracket, unsnap the bracket , unplug the motor remove the bracket and remove the fan. Install condenser fan and everything in reverse. Any one can do it.
Jimmy L, Mountain Rest,S.C. 29664
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend