$24.24 |Â
20% OFFÂ Phone Price : $30.24
Tips to find your model number
Product type
Select appliance
Model numbers typically look like this:
CONFIRM THE PART FITS
Sleeve Bearing WE03M0015
Part #WE03M0015
Replaced by #WE25M40
?
Manufacturer substitution
This part replaces WE03M0015. Substitute parts can look different from the original.
Online Price
$64.45 |Â
10% OFFÂ Was : $71.61
In Stock
For ZIP codes near Edit
This part fits
Part Information
This drum bearing kit (part number WE25M40) is for dryers.
Drum bearing kit WE25M40 helps the drum rotate smoothly and quietly.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $7.63 |Â12% OFFÂ Phone Price : $8.63
- $14.29
- $15.97 |Â11% OFFÂ Phone Price : $17.97
- $24.29
- $28.15 |Â18% OFFÂ Phone Price : $34.15
- $22.36 |Â21% OFFÂ Phone Price : $28.36
- $30.11 |Â17% OFFÂ Phone Price : $36.11
- $24.59 |Â20% OFFÂ Phone Price : $30.59
- $83.41 |Â7% OFFÂ Phone Price : $89.41
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #DHSR333GV1WB GE dryer | DHSR333GV1WB | Drum |
| Model #DDG8289VCC GE dryer | DDG8289VCC | Drum & duct asm. (gas) |
| Model #DDG8280VCC GE dryer | DDG8280VCC | Drum & duct asm. (gas) |
| Model #DDG7286 GE dryer | DDG7286 | All parts |
| Model #DDG8586MAL GE dryer | DDG8586MAL | All parts |
| Model #DDG8288PKC GE dryer | DDG8288PKC | Drum & duct asm. (gas) |
| Model #DLL2880ABC Hotpoint dryer | DLL2880ABC | Drum & duct asm. (gas) |
| Model #DDG9280VCC GE dryer | DDG9280VCC | Drum & duct asm. (gas) |
| Model #DDG6380VCL GE dryer | DDG6380VCL | Blower & drive asm. (gas) |
| Model #DDG5989VCL GE dryer | DDG5989VCL | Blower & drive asm. (gas) |
Reviews
Great
Just what i need it perfect replacement and esy to install
Alex M, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
The right parts for the job.
I inadvertently bought some duplicates (single parts and an entire bearing assembly), but I'll just keep those for spares. Parts arrived quickly and were exactly what I needed.
The D D, Kansas City
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Great product, easy to install.
It took about 39 minutes for start to finish to complete the replacement.
Fil1, Norwalk, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
$100 saved buying an $800 one
About 2hrs. But instructional time Included with my 2 daughters 14 & 15. Replaced belt, slide guides, felt, tub bearing and vacuum cleaned. Good for a few more years.
Handiman, Maine
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
.
It was missing 3 of the 4 screws for the part hat mounts on the back of the dryer, but I was able to ruse the old screws. Otherwise, kit was good.
Mr. S, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Drum rear bearing replacement
I installed the drum rear bearing, male part that attaches to the back of the drum, not the steel female end that mounts behind the rear wall of the dryer. Steel should not wear out if the bearing is plastic, so the extra time to do that seemed like a waste of time.
EdLa, Hershey, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Not real difficult to install
Had to take the dryer apart, not difficult, or easy. In the middle. Put the new part in, and the dryer runs better.
Travis12578, Tucson, AZ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Check out YouTube for instructions
Best to have 2 people, especially when reinstalling drum and belt - part fit fine :)
JDH P, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour