CONFIRM THE PART FITS
Part Information
This steering control trigger (part number 731-06113) is for snowblowers.
Steering control trigger 731-06113 allows you to steer the snowblower to the right or left.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $9.33 |Â10% OFFÂ Phone Price : $10.33
- $26.49 |Â18% OFFÂ Phone Price : $32.49
- $6.05 |Â14% OFFÂ Phone Price : $7.05
- $21.29 |Â22% OFFÂ Phone Price : $27.29
- $23.59 |Â20% OFFÂ Phone Price : $29.59
- $83.61 |Â7% OFFÂ Phone Price : $89.61
- $5.88 |Â15% OFFÂ Phone Price : $6.88
- $6.20 |Â14% OFFÂ Phone Price : $7.20
- $3.00 |Â25% OFFÂ Phone Price : $4.00
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #247985380 Craftsman gas snowblower | 247985380 | Handle panel/handles/chute |
Model #31AS53SF793 MTD gas snowblower | 31AS53SF793 | Handle panel/handles |
Model #247985370 Craftsman gas snowblower | 247985370 | Handle panel/handles |
Model #31AH54SG793 MTD gas snowblower | 31AH54SG793 | Handle panel/handles/chute |
Model #247887910 Craftsman gas snowblower | 247887910 | Lower chute/handles |
Model #247886910 Craftsman gas snowblower | 247886910 | Handles/lower chute |
Model #247985390 Craftsman gas snowblower | 247985390 | Handle panel/handles/chute |
Model #31AH55TH793 MTD gas snowblower | 31AH55TH793 | Handle panel/handles/chute |
Model #31AH55TH799 MTD gas snowblower | 31AH55TH799 | Handle/chute |
Model #247887940 Craftsman gas snowblower | 247887940 | Upper handle/handle panel |
Reviews
Excellent.
Very pleased that sears still has parts for older model snowblowers at reasonable prices. The correct part arrived quickly, before the next snow. The part installed easily and the snowblower is good to go again. Very happy with my experience with the service.
Jonny J, Waterloo, IA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Steering control trigger
Direction was easy to follow. The part was easy to install
[email protected], Arpin,WI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Yes, Easy to install
Took about 20 mins. Use long nose plier & E Clip Tool
Chaii, Buffalo,NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
A lot easier to install than I thought it would be
Really easy to install. Took less than five minutes. Just had to remove the control trigger pivot pin which allowed the control trigger to drop down enough to allow access to the control cable. Then it was easy enough just to swap out the control triggers and put back in the trigger and the control pin.
Rhino85, Milwaukee WI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Exact part
Took around half an hour to install. Back to fully functional.
Photohiker408, North Jresey
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Simple install
Took a few minutes to figure out how to get to it due to the shoot remote stick. Once I removed 3 screws and 1 nut it only took a few minutes to replace.
Chevy, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy install
Very simple installation, one pin and clip for removal, detach cable, insert cable to new trigger, slide into bracket install pin and clip ,done 5 minutes
Brownie, Newport N.H.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy install
Probably took less than 10 minutes to install the new trigger
Elle, Cheney, WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend