$85.97 |Â
7% OFFÂ Phone Price : $91.97
CONFIRM THE PART FITS
Range Oven Control Board (replaces 9782455) WP9782455
Part #WP9782455
Part Information
This oven control board (part number WP9782455) is for ranges.
Oven control board WP9782455 monitors the temperature and controls the oven heat.
Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.
Frequently Used Together
- $135.26
- $72.82 |Â8% OFFÂ Phone Price : $78.82
- $135.26
- $152.26
- $153.09 |Â7% OFFÂ Phone Price : $165.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #KGSC308LSS0 KitchenAid gas range | KGSC308LSS0 | |
| Model #KGRC707LBT0 KitchenAid gas range | KGRC707LBT0 | |
| Model #KGST307HBT9 KitchenAid gas range | KGST307HBT9 | |
| Model #KGST307HBS9 KitchenAid gas range | KGST307HBS9 | |
| Model #KGRC707LBL0 KitchenAid gas range | KGRC707LBL0 | |
| Model #YKGRT607HT9 KitchenAid gas range | YKGRT607HT9 | |
| Model #YKGST307HB9 KitchenAid gas range | YKGST307HB9 | |
| Model #KGRC707LBS0 KitchenAid gas range | KGRC707LBS0 | |
| Model #YKGRT607HB9 KitchenAid gas range | YKGRT607HB9 | |
| Model #YKGST307HW9 KitchenAid gas range | YKGST307HW9 |
Reviews
Easy to Install - Saved our Kitchenaid Oven!
Backordered Control Board still arrived in a little over a month -- so, not too long, really. The physical install was easy. At first it did not want to work, but after looking up codes on the internet, turning the power off and on again a few times, and also messing with the jumper positions a bit (I know, seems complo but really is pretty easy) it all started working! Now our oven is working again just fine and we saved the price of a new oven. Plus, we could not find an oven that we like as much as this one -- even if were to spent over $5K!
Shannon, Shoreline WA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
easy to replace
Pretty easy to install, key focus is to make sure you follow instruction sheet for configuration of the new board.
Richman, Springfield, Mo
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install.
After installing the part and turn on the power, you should watch the control board. Once 'PF' shows you should start the End of Servco Test. If you start the Test after a few minutes, it will not do the Test and error code appears.
Juston B, Honolulu
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
very satisfied
Easy to install-plug and play. Simple process from ordering the part to installation.
Jaws, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Needs configuration instructions
It was easy to install, but the firmware also needed to be configured. No instructions. It would have saved about 1 hour of searching and trying various things if there had just been a very short installation/configuration page with it.
Doug666, Idaho
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Easy to install control board
This was a no-brainer. Three screws a couple of circuit connectors and back in working order that would have cost at least twice as much for a servicer to fix. Only wish it had come with a packing slip for my records, and some instruction that you needed to reset and calibrate the board on initial install. I had to figure this out after the fact but thank god for the Internets...
dewong, Plymouth, MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Damaged
Part was damaged at one connection pin. As the damage caused digital numbers 1-8 to not work the programming set up would not work. Must return.
J C P, CT
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Didn't work
It was easy to install but didn't work. There was no power to the oven
Sunia, Cambridge, MA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour