$353.41 |Â
$12.00 OFFÂ Phone Price : $365.41
CONFIRM THE PART FITS
IMPLR-3 BLAD 684-04057C-0662
Part #684-04057C-0662
Replaced by #684-04057C-0637
?
Manufacturer substitution
This part replaces 684-04057C-0662. Substitute parts can look different from the original.
Online Only Price
$83.61 |Â
7% OFFÂ Phone Price : $89.61
In Stock
For ZIP codes near Edit
Part Information
This impeller (part number 684-04057C-0637) is for snowblowers.
Impeller 684-04057C-0637 rotates to blow snow up and out the chute.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $3.00 |Â25% OFFÂ Phone Price : $4.00
- $3.14 |Â24% OFFÂ Phone Price : $4.14
- $4.40 |Â19% OFFÂ Phone Price : $5.40
- $5.42 |Â16% OFFÂ Phone Price : $6.42
- $41.50 |Â13% OFFÂ Phone Price : $47.50
- $32.00 |Â16% OFFÂ Phone Price : $38.00
- $32.27 |Â16% OFFÂ Phone Price : $38.27
- $75.84 |Â7% OFFÂ Phone Price : $81.84
- $59.09 |Â9% OFFÂ Phone Price : $65.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #31AS63EE793 MTD gas snowblower | 31AS63EE793 | Auger & housing |
| Model #247886910 Craftsman gas snowblower | 247886910 | Auger/housing |
| Model #31AH64FG731 MTD gas snowblower | 31AH64FG731 | Auger & housing |
| Model #769-05284 MTD gas snowblower | 769-05284 | Auger & housing |
| Model #31AM62EE752 MTD gas snowblower | 31AM62EE752 | Auger & housing |
| Model #31AM62EE700 MTD gas snowblower | 31AM62EE700 | Auger & housing |
| Model #31AM62EE706 MTD gas snowblower | 31AM62EE706 | Auger & housing |
| Model #247985380 Craftsman gas snowblower | 247985380 | Auger & housing |
| Model #31AH54SG793 MTD gas snowblower | 31AH54SG793 | Auger & housing |
| Model #247887910 Craftsman gas snowblower | 247887910 | Auger/housing |
Reviews
Snowblower impeller for 247.888300
2-4 hours to install. Check uTube for installation video. Had to grind down the impeller shaft for the impeller to slide on the shaft.
TEB80420, Alma CO
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Easy to install
Wasn't to heard to install. Just a reverse assembly of taking it apart.
Jerry9492, California
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Doable
Luckily I was able to find a video on YouTube with a guy doing this repair; otherwise I'm not sure I would have tackled it, as you literally have to take the blower in half to get to it. That being said, with the video help, it went relatively smoothly, and took a little over an hour-ish. Make sure to pay attention to where the belt and clips run when you disassemble for easier reassembling.
Das l, Sheldon, IA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours