CONFIRM THE PART FITS

Snowblower Drive Belt OEM-754-0346

Part #OEM-754-0346

Replaced by #954-0346
?
Manufacturer substitution
This part replaces OEM-754-0346. Substitute parts can look different from the original.
Online Only Price
$29.80 | 
17% OFF Phone Price : $35.80
In Stock
For ZIP codes near Edit
Eligible for FREE standard shipping with subscription! Details
60-day return policy
This part fits

Part Information

This belt (part number 954-0346) is for lawn and garden equipment.

Belt 954-0346 transfers motion from one pulley to another to move components in the equipment.

Wear work gloves to protect your hands when installing this part.

Reviews

Fast delivery
February 24, 2021

Also, it is a very good product and installation easy

Snowman, Vermont

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Don't try this alone!
December 03, 2019

This review is for part 954-0430B or 754-0430B. I don't know which is replacement or which is original. DON'T DO THIS ALONE! You must dissemble the machine to get at the auger belts. There is NO other option. This isn't easy and I'm VERY handy. The key is to release the auger engagement wire at THE HANDLE underneath the control console. If you don't, you can't get the machine apart without damage. After installing the 2 new belts, you will need to pick up the auger unit while a 2nd person guides it onto the 6 bolts and ensures the belts don't come off the pulley. THIS ISN'T EASY. However, shop estimate was $275, IF everything else was ok. I would've junked the machine.

COGATOR, High Mountains Colorado

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
More than 2 hours
Easier than I thought it would be, after I watched
November 05, 2018

It took me about an hour, but that included pulling it out of the shed, changing the oil, siphoning out a little gas, oiling the chains and bar the transmission slides on, and pulling out my generator to run for a while too.

Yes, I've been meaning to take care of that rust. I bought the paint!
I unscrewed this to get the cable out to make it easier to get the spring off.
I removed the spring for the belt to come out of the pulley and I drew the belt up behind the bar so it would turn flat easier to roll under the wheel and out.
Took off cover

Eric B, Windsor Ct

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour