CONFIRM THE PART FITS
Dishwasher Pump and Motor Assembly (replaces W10864037, W10885542) W11032770
Part #W11032770
Part Information
Dishwasher pump and motor assembly W11032770 is an original equipment manufacturer (OEM) part that fits Kenmore, Kenmore Elite, IKEA, Jenn-Air, KitchenAid and Whirlpool dishwashers.
Pump and motor assembly W11032770 pumps water through the spray arms during the dishwashing cycle.
The single-phase synchronized wash motor is rated at 120 volts, 60-Hz. Power use is 37-watts, with 45-watt maximum power rating.
Replaces original dishwasher pump and motor assembly parts W10529163, WPW10529163 and W10864037.
Frequently Used Together
- $54.85|Â10% OFF Phone Price : $60.85
- $21.32|Â22% OFF Phone Price : $27.32
- $60.57|Â9% OFF Phone Price : $66.57
- $8.02|Â11% OFF Phone Price : $9.02
- $83.32|Â7% OFF Phone Price : $89.32
- $22.13|Â21% OFF Phone Price : $28.13
- $47.55|Â11% OFF Phone Price : $53.55
- $4.37|Â19% OFF Phone Price : $5.37
- $17.63|Â10% OFF Was : $19.59
- $7.18|Â12% OFF Phone Price : $8.18
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #66512723K310 Kenmore dishwasher | 66512723K310 | Pump, washarm and motor parts |
Model #66513693N412 Kenmore dishwasher | 66513693N412 | Pump, washarm and motor parts |
Model #WDF750SAYW3 Whirlpool dishwasher | WDF750SAYW3 | Pump, washarm and motor parts |
Model #66513252K113 Kenmore dishwasher | 66513252K113 | Pump and motor parts |
Model #66213032K112 Kenmore dishwasher | 66213032K112 | Pump and motor parts |
Model #66513032K113 Kenmore dishwasher | 66513032K113 | Pump and motor parts |
Model #66213039K112 Kenmore dishwasher | 66213039K112 | Pump and motor parts |
Model #66513033K112 Kenmore dishwasher | 66513033K112 | Pump and motor parts |
Model #66513032K116 Kenmore dishwasher | 66513032K116 | Pump, washarm and motor parts |
Model #66513033K115 Kenmore dishwasher | 66513033K115 | Pump and motor parts |
Reviews
Dishwasher "Wash Pump Motor"
The motor was an exact match and is functioning like it is supposed to. I would recommend Sears Parts Direct to anyone looking for OEM replacement parts.
Mark C, Louisiana
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part as described, required special tool though
It's the right part, shipped quickly, was relatively easy to install. Two comments - the clamp on the hose assembly requires a PEX clamp tool, it's not the kind with a screw, if you don't have a PEX clamp tool, or don't want to buy one, you'll need to find a 5/16 wide clamp of the right diameter (over 1", but I don't know the exact size) online somewhere - Home Depot/Lowes near me didn't have them. Second, when you reinstall the "Diverter, Motor" do it with the dishwasher completely upside down. I tried doing it with the dishwasher just on its side and could not get it in all the way. As soon as I put the dishwasher upside down it went in properly.
BernieS, Utica, NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Dishwasher
Repairman installed and wow clean dishes again!! Thx Sears for having the part in stock.
Clean d, Peterson,MN
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Damaged
They take very little into account when packaging these items. Pump finally arrived smashed beyond repair. Guess I'll wait another 10 days to have a new pump delivered.
Sean, Nj
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy and exact
Simple and fairly easy to install, works great. Was an exact fit.
Riloh, Indiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Pump works great!
The original clamps were a bit of a pain so I replaced them with different band clamps. It works great and it's nice to not hand wash dishes anymore!
Jeff, Rockford, Il
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Did the job
My Whirlpool washer would fill and drain but wouldn't circulate water or run the jets. I bought this Pump & Motor to fix it. Getting the washer out and flipping it over was a pain (get a bunch of towels) but installing the pump was relatively easy. The pump itself comes with a pinch/Oetiker-style clamp already installed - you either need to replace it with a worm clamp or buy a pair of pinch pliers. I bought a pair of Knipex pliers for the job and it was simple. Washer is back to functioning again.
Shart_Attack, Austin, TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Took a special tool for clamps. Any DIY can figure it out.
Stan, Arkansas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend