$332.52 |
$12.00 OFF Phone Price : $344.52
CONFIRM THE PART FITS
Part Information
This dispenser control board (part number WR55X23215) is for refrigerators.
Dispenser control board WR55X23215 controls water and ice dispenser operations in the refrigerator door.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $91.44 |6% OFF Phone Price : $97.44
- $125.14 |9% OFF Phone Price : $137.14
- $47.02 |11% OFF Phone Price : $53.02
- $96.13 |11% OFF Phone Price : $108.13
- $12.76 |14% OFF Phone Price : $14.76
- $182.92
- $87.37 |6% OFF Phone Price : $93.37
- $10.85 |16% OFF Phone Price : $12.85
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #GSS25JETHCC GE side-by-side refrigerator | GSS25JETHCC | |
| Model #ESH25JFWBWW GE side-by-side refrigerator | ESH25JFWBWW | |
| Model #GSH22JFTDCC GE side-by-side refrigerator | GSH22JFTDCC | |
| Model #ESH25JFWDBB GE side-by-side refrigerator | ESH25JFWDBB | |
| Model #GSH22JFTBBB GE side-by-side refrigerator | GSH22JFTBBB | |
| Model #ESH22JFWCBB GE side-by-side refrigerator | ESH22JFWCBB | |
| Model #ESH25JFXBWW GE side-by-side refrigerator | ESH25JFXBWW | |
| Model #GSH22JFTBWW GE side-by-side refrigerator | GSH22JFTBWW | |
| Model #GSH25JFTCCC GE side-by-side refrigerator | GSH25JFTCCC | |
| Model #GSH22JFXMWW GE side-by-side refrigerator | GSH22JFXMWW |
Reviews
Great purchase
Just what I ordered. Worked perfectly. Cheaper than other sites.
Ron A, Greenwood, SC
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Really easy to install
It was Soo easy to install , only took a few minutes . It works great and looks great.
Neeley, Vansant VA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Perfect fit
Love that it fit and worked perfect, it looked to be have redesigned, love the new look
Rayzor94, Orlando Florida
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Takes about 5 minutes to replace
Quite simple for most DIYers. First, roll out your refrigerator and UNPLUG IT. Good time to clean that dust while you're back there. Second, look under the water dispenser area. There are 3 small holes just under the dispenser control board. Use a small Allen or Phillips wrench to press into one of the end holes as you SLOWLY pull the old dispenser control board out. When it starts to give, move the Allen wrench to the middle hole and pull until the board is out. There are 3 white electrical connectors holding it to the refrigerator. Unplug each one. The old control board is now off. Install the new control board by plugging in the connectors to the replacement control board the same way they came off of the old one. Put the control board up to the opening and push it straight into the refrigerator. It will click into place. Plug the refrigerator back into the outlet and roll it back into place.
Doitmyselferguy, Des Moines, IA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes