CONFIRM THE PART FITS

Dishwasher Electronic Control Board (replaces W10084142) WPW10084142

BEST SELLER

Part #WPW10084142

Online Only Price
$222.53
| 
5% OFF Phone Price : $234.53
In Stock
For ZIP codes near Edit
60-day return policy 

Part Information

This electronic control board (part number WPW10084142) is for dishwashers.

Electronic control board WPW10084142 manages the functions of the dishwasher such as washing, draining and drying.

Unplug the dishwasher before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #66513739K601 Kenmore dishwasher66513739K601
Control panel parts
Model #66513833K601 Kenmore dishwasher66513833K601
Control panel parts
Model #66513732K601 Kenmore dishwasher66513732K601
Control panel parts
Model #KUDC03ITBS2 KitchenAid dishwasherKUDC03ITBS2
Control panel parts
Model #KUDC20CVBL0 KitchenAid dishwasherKUDC20CVBL0
Control panel parts
Model #DU1101XTPQB Whirlpool dishwasherDU1101XTPQB
Control panel parts
Model #66513734K601 Kenmore dishwasher66513734K601
Control panel parts
Model #66513839K601 Kenmore dishwasher66513839K601
Control panel parts
Model #66513733K601 Kenmore dishwasher66513733K601
Control panel parts
Model #66513834K601 Kenmore dishwasher66513834K601
Control panel parts

Reviews

Washing Again!
December 21, 2021

If you can run a cordless drill & unplug a cord from a light socket...you can replace this unit. Total replacement time from start to finish 15 minutes.

Scott, Brooklet, GA

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

dishwasher board
August 27, 2018

put the board in and it did the same thing the old board did went out this weekend and bought a new dishwasher

hwbus, anaheim calif

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Quick and easy though risky repair.
August 20, 2018

Symptom: no front panel response after lightning strike took out coffee maker on nearby outlet. An easy 6 top screws panel removal revealed the original control board obviously seriously destroyed by the lightning spike - the board's surge suppressing varistor was blown apart putting a layer of black soot on adjacent components. Electronics expert advice would be to NOT replace since other parts in the machine were likely affected as well. But, considering the cost of a new dishwasher, and that except for indicator LEDs, the other components were probably passive, we decided that trying a new control board was worth a gamble. Replacement was easy once we noticed that ribbon cables coming in from side had retaining hooks that took light pressure to push down out of the way while removing the old board. There is also a disk shaped part that is most easily removed from its clip by pushing it sideways. Apparently the board is a general purpose design that can be used in a lot of different washers with different features so extra care was needed inserting an end ribbon cable with the proper offset ' clearly indicated on the board lettering. It looks like we got lucky. We had a scare when the first load stuck on an endless final rinse that got steaming hot and had to be cancelled to finis and drain. Perhaps we confused things by checking too often and were thinking we could only use it with manual intervention or further repair. However, the next cycle worked and everything continues to work normally after several loads. Unless another part was weakened by the lightning surge we may get another 5 years out of an appliance we are familiar and happy with.

TestPoint, Blacksburg, VA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Was easy to install.
March 10, 2018

Suggest taking a pic of the PC board prior to uninstalling

RussMMm, Dartmouth MA

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour