CONFIRM THE PART FITS

Washer Tub-to-Pump Hose (replaces W10467168) WPW10467168

BEST SELLER

Part #WPW10467168

Online Only Price
$27.03 | 
18% OFF Phone Price : $33.03
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

Tub-to-pump hose WPW10467168 is an original equipment manufacturer (OEM) part that fits some Kenmore, Kenmore Elite, Whirlpool, Amana, KitchenAid and Maytag front-load washers.

Tub-to-pump hose WPW10467168 carries the water from the tub to the drain pump.

Replaces original front-load washer tub-to-pump hose part numbers 8181732, W10003240, W10241029 and W10467168.

Fits some front-load washers in the following series: Kenmore and Kenmore Elite 110; Whirlpool 7MGHW, 7MWFW, BNQ, GHW, MWFW, WFL and WFW; Amana NFW5700, NFW7500 and NFW7600; KitchenAid KHWS and KHWV; and Maytag 7MMHW, MFW, MHW and MHWE.

Reviews

Easy installation
November 16, 2021

Service repair was done in laundry room with ease in hour.

Washer h, Mechanicsville maryland

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Late delivery I got it fixed 4 weeks ago
August 15, 2021

Buy from anyone but Sears no wonder they are going out of business, took 4 weeks to get the part

Longdelivery, Boston

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

It took three weeks to send it to me
July 18, 2021

Slowest order I ever finally received I think they ordered it from China and then when they received it they sent it to me

Mr A, Tampa, fl

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Tough to Install
June 08, 2021

As a novice, but required, appliance repair man, it took me and my boy to put this on. The rubber was thicker than the OEM part I took off. While you think this may make the part better, it made it a bear to put on due to the small working space and tight tolerances of the spring loaded band that holds it on. You need to access the front and back of the washer at the same time, hence the need for 2 people. Have extra patience for this fix. Also, the part was not exactly like the OEM. This one did not have the rubber to hold the plastic ball in place, like the old one did. I just put the ball in there hoping it all worked. So far no problems.

Nubby, Texas

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Drain boot on washer
March 21, 2021

Easy to install. Access slightly limited. Fit great

Robo, Michigan

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Right part number on bag, but wrong part in bag.
February 10, 2020

The bag I received had the right part number as referenced in the online docs, but the part contained in the bag was not the same as pictured on the searspartsdirect . Online chat resolved the issue and correct part is on the way, however, will be 3 weeks since I originally ordered the part.

KenInRoundRock, Round Rock, TX

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Perfect fit!! Fast shipping!!
September 22, 2019

Easy to install after watching a video. Only took about 10 minutes.

Barbercj, Rotterdam NY

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Not overly to hard but offered a few challenges.
November 25, 2018

Simple repair but had to make sure everything was in place and tight in the bottom of the washer so I had to raise up the bottom in order to operate on it. Overall, not bad.

Wetlandsman, Nelson, NH

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour