CONFIRM THE PART FITS

Refrigerator Ice Maker Kit (replaces 5989JB0001A) AEQ36756901

BEST SELLER

Part #AEQ36756901

Online Only Price
$201.40
| 
6% OFF Phone Price : $213.40
In Stock
For ZIP codes near Edit
60-day return policy 
This part fits

Part Information

Helpful DIY instructions: Installation guide.

Refrigerator ice maker kit AEQ36756901 is an original equipment manufacturer (OEM) part that fits some refrigerators in these series: Kenmore 795; Kenmore Elite 795; and LG LFX, LMX and LSC.

Ice maker AEQ36756901 receives water from the water inlet, holds the water in the ice mold until the water freezes solid and then automatically ejects the ice and refills to continue the process until the ice storage in is full.

This ice maker kit contains the complete ice maker, housing and control device.

Replaces original refrigerator ice maker assembly part 5989JB0001A.

Reviews

ice maker replacement
December 30, 2022

Hardest part is unhooking and hooking up the wiring harness as its very short

Moose, Ny the Vampire State

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes
Kenmore ice maker
June 20, 2022

The ice maker was delivered on time. And it was not hard to install.

Sherman, Tx

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Stopped workimg
September 07, 2021

Ice maker worked one day then quit. Sent back for refund. Would have been good to have if it didn't quit.

U2canbsvd, Johnson city, ny

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Easy to confirm correct part & Order.
August 18, 2021

Ice maker was not that difficult to install. First, Unplug Fridge, shut off water line to the fridge and remove Ice bucket. You then have 5 screws holding the whole unit on the inside of fridge door to remove. Once you take the screws out, you have to unplug the whole unit from the inner fridge door. Once the whole part is out, you then take the Ice Maker off the fridge insert. The Ice Maker then only has two screws holding the unit to the fridge door insert. Then just go in reverse to in stall the replacement Ice Maker. Connect the plug to the Ice Maker and then Mount it to the door insert with the two screws. Then take the insert, with Ice Maker attached and plug the main connections back into the fridge door. This is a little tricky, since the connecting wire harness is short, but you can squeeze you hand in behind it to plug it in. Once everything is connected, line up the door insert with the screw holes, making sure the water outlet is aligned with the ice maker. You then screw the whole unit back onto the inner fridge door with the 5 screws removed first. Plug the fridge back in and turn the water back on. To get any air out that may be in the water line, just take a glass and fill it with the fresh water outlet till it runs smoothly. It may sputter a little bit till all the air is out. Now just wait for the Ice maker to start making ice. I waited till it filled the ice bucket to make sure it shuts off automatically when bucket is full. It does.

Pete, Syracuse, NY

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

All went well,
August 06, 2021

All went well, it was very easy to install and was what the problem was, now it's back to making ice. Thank you Jack

Jack, Jensen Utah

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Icemaker Easy To Install !!!!
April 25, 2021

Ice Maker Works !!! OEM !!! Everything Fits Like Factory

Franko, Maryland

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install and if fixed the "no ice" problem
December 23, 2020

It only took 15 min to install and once it was cold enough, it started producing ice.

chefskier, new york

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Need better shipping packaging.
October 24, 2020

Had to request a second replacement part as it was not well packaged so plastic parts were cracked and broken. Other materials are inferior quality. Also, Ground wire screw did not fit replacement ice maker very well.

Ted77, East Tx

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend