CONFIRM THE PART FITS

Evaporator Motor 4390914

Part #4390914

Replaced by #WP3-60336-001
?
Manufacturer substitution
This part replaces 4390914. Substitute parts can look different from the original.
Online Only Price
$164.44
7% OFF Phone Price : $176.44
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This evaporator fan motor (part number WP3-60336-001) is for freezers.

Evaporator fan motor WP3-60336-001 circulates air through the freezer for efficient cooling.

Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #MQU1656BEW Maytag upright freezerMQU1656BEW
Unit compartment & system
Model #MQU2057AEW Maytag upright freezerMQU2057AEW
Unit compartment & system
Model #MQU1556AEW Maytag upright freezerMQU1556AEW
Unit compartment & system
Model #F20WCE WC Wood upright freezerF20WCE
Compressor assy
Model #F1613RW3 WC Wood upright freezerF1613RW3
Compressor assy
Model #WCF15E Crosley upright freezerWCF15E
Compressor assy
Model #WCF16W3 Crosley upright freezerWCF16W3
Compressor assy
Model #WCF20E Crosley upright freezerWCF20E
Compressor assy
Model #WCF17ER Crosley upright freezerWCF17ER
Compressor assy
Model #MQU2057BEW Maytag upright freezerMQU2057BEW
Unit compartment & system

Reviews

Fast delivery, but had to cut the shaft to fit.
May 19, 2018

Correct part but a newer level and I had to cut about 3/8" off the shaft to fit in the freezer, if not the press on blades would hit the back wall. Fairly easy to do but had to un install, cut, re install. Mounting was the same and it has worked for several weeks now so it is fixed.

Model T S, Zionzville IN

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours
Quick and easy replacement part
February 22, 2018

The replacement motor took less than an hour to complete and I did have to make a simple modification. The new motor wiring harness connector would have worked but it unfortunately didn't have a easy way to remove the third wire from the connector that goes to the defrost heater coil. I just simple used the old connector and soldered the new fan motor wiring to it. If it were not for that it probably would have only taken about 15 minutes to complete repair. Needless to say the part fits and is working and doing the job it was designed for.

Paw-Paw, Hampton, Virginia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour