CONFIRM THE PART FITS

Microwave Cooking Rack Support 8204662

Part #8204662

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Part Information

This cooking rack support (part number 8204662) is for microwaves.

Cooking rack support 8204662 attaches to the microwave cavity wall and supports the cooking rack.

Unplug the microwave before installing this part.

Top models using the same part

Model NameModel NumberDiagram Name
Model #YGH8155XMQ1 Whirlpool microwave/hood comboYGH8155XMQ1
Magnetron and turntable parts
Model #YMH7155XMB0 Whirlpool microwave/hood comboYMH7155XMB0
Magnetron and turntable parts
Model #YMH7155XMB1 Whirlpool microwave/hood comboYMH7155XMB1
Magnetron and turntable parts
Model #66561619101 Kenmore microwave/hood combo66561619101
Magnetron and turntable
Model #MH2155XPB0 Whirlpool microwave/hood comboMH2155XPB0
Magnetron and turntable parts
Model #YKHMS155LSS2 KitchenAid microwave/hood comboYKHMS155LSS2
Magnetron and turntable parts
Model #YKHMS155LWH1 KitchenAid microwave/hood comboYKHMS155LWH1
Magnetron and turntable parts
Model #KHMS147HWH2 KitchenAid microwave/hood comboKHMS147HWH2
Magnetron and turntable parts
Model #KHMS147HBL2 KitchenAid microwave/hood comboKHMS147HBL2
Magnetron and turntable parts
Model #YKHMS155LBT2 KitchenAid microwave/hood comboYKHMS155LBT2
Magnetron and turntable parts

Reviews

Removal of old -TOUGH, Install fairly easy BUT....
September 22, 2019

Removing the old feet have tabs that are almost impossible to pinch unless you push or pull on one side and slightly warp the square hole and use a finch sharp to pinch to push in while carefully pulling you. DO NOT remove any paint from the metal. Once removed use the back side of a screwdriver plastic handle with a business paper card covering the hole to carefully pound the metal of the microwave hole so there is no warping or bends and the side is flat. Once done then push in the new foot.

NewbieWaves, Washington

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour