$6.98 |Â
13% OFFÂ Phone Price : $7.98
CONFIRM THE PART FITS
Refrigerator Motor Assembly 4681JK1004D
Part #4681JK1004D
Replaced by #4681JB1029H
?
Manufacturer substitution
This part replaces 4681JK1004D. Substitute parts can look different from the original.
Online Only Price
$73.07 |Â
8% OFFÂ Phone Price : $79.07
In Stock
For ZIP codes near Edit
This part fits
Part Information
This evaporator fan motor (part number 4681JB1029H) is for refrigerators.
Evaporator fan motor 4681JB1029H circulates air through the fresh food compartment for efficient cooling.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $6.98 |Â13% OFFÂ Phone Price : $7.98
- $11.11 |Â15% OFFÂ Phone Price : $13.11
- $246.47 |Â5% OFFÂ Phone Price : $258.47
- $22.07 |Â21% OFFÂ Phone Price : $28.07
- $26.29 |Â19% OFFÂ Phone Price : $32.29
- $11.07 |Â15% OFFÂ Phone Price : $13.07
- $6.98 |Â13% OFFÂ Phone Price : $7.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LTC24380SB00 LG top-mount refrigerator | LTC24380SB00 | Freezer parts |
| Model #79568032210 Kenmore top-mount refrigerator | 79568032210 | Freezer parats |
| Model #79578546805 Kenmore Elite bottom-mount refrigerator | 79578546805 | Case parts |
| Model #79578344803 Kenmore Elite bottom-mount refrigerator | 79578344803 | Case parts |
| Model #79575559400 Kenmore Elite bottom-mount refrigerator | 79575559400 | Case parts |
| Model #79577252601 Kenmore Elite bottom-mount refrigerator | 79577252601 | Case parts |
| Model #LRDC22744TT LG bottom-mount refrigerator | LRDC22744TT | Case parts |
| Model #79577242600 Kenmore Elite bottom-mount refrigerator | 79577242600 | Cabinet parts |
| Model #79578314801 Kenmore bottom-mount refrigerator | 79578314801 | Case parts |
| Model #LFC23760ST/00 LG bottom-mount refrigerator | LFC23760ST/00 | Case parts |
Reviews
Fan replacement
Easy to remove and install for mechanically inclined.
DaNe, Florida
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Different manufacturer than original but fits and works the same.
Terri, Ringgold, Georgia
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Exact Fit
Part was an exact fit to the original and very easy to install.
TAK8, Florida
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fan motor
Good and quick service ............................
Undisclosed, Piscataway
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
fit perfect, and runs quiet
I had ordered the part from someone else and it did not have long enough wires to work so I have done this before and it went much smoother this time. But it is still a pain getting down and in the freezer compartment. My ice maker is held on with 3 screws you only have to take the bottom 1 out just loosen the top 2 and lift it out.
Bob 4, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Right part First time
Cover is hard to get back on and most of the time you done need the fan blade. The old one comes off easy
MikeWCPS, Laurel Ms
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
OK, but two screws were a tad tricky
Original fan blade was a bit stubborn to come off shaft, but slowly worked retaining clip off. After that, wanted to make sure fan blade in same location by marking with fine too sharpie pen. All went very well, and product working fine.
Ed63, Holland, IN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Took about 25 minutes, start to finish. Not counting the time to empty the freezer.
Dr. S, Harvest, AL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour