CONFIRM THE PART FITS

Refrigerator Freezer Door Gasket (replaces 12550116Q) WP12550116Q

Part #WP12550116Q

Online Only Price
$75.93 | 
7% OFF Phone Price : $81.93
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

Special details: Smooth folds and creases in gasket WP12550116Q by soaking it in warm water or warming it with a hair dryer on low heat.

This freezer door gasket (part number WP12550116Q) is for refrigerators.

Freezer door gasket WP12550116Q creates a seal around the door to prevent warm air from entering the freezer compartment.

Safely store any food that could deteriorate while the door is open for this repair.

Reviews

Easy with a little patients.
January 17, 2022

Perfect fit, I removed the drawer by the release tabs on the rear of the drawer slides, laid it face down on towels pulled back the old strip and loosen all the 1/4 inch screws, do not remove them completely. Remove old strip clean the door and install the new strip do not use power driver to tighten screws.

Eddydotd, Melbourne Florida

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Wrong part again (for the third time)
December 27, 2021

Did not install. Returned part which was the third incorrect part that I received from you.

nuts, Winder,Ga

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
More than 2 hours

Yes, I would recommend this to a friend

Poor
October 24, 2021

The product had a poor magnet in it would not even seal very dissatisfy with it. Plus all the time spent installing it and then taking it back out and putting the old one back on.

Chris 2, Silver Lake NH

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Fit perfectly
August 02, 2021

This part fit perfectly on my 15-year-old refrigerator/freezer. Perfectly replaced the old gasket that was deteriorating.

Jim G, Los Angeles, CA

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Exact fit.
June 13, 2021

Remove gasket. Loosen all screws 3 full turns. Useing a flathead screw driver gently slide the blade into to gap and slide it around the 4 sides to clean any old glue out. Then just work the gasket into the crack. If you still have trouble you can use a paint can opener from the inside to create the gap needed to work the tab into place. Then snug the screws back down.

Goose, Virginia

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Gasket installation
May 24, 2021

Watched video on installation, installation did not go as shown. I found out that totally removing the inside panel (~25 screws) made install more smooth. Took me about 2 hours, would have gone faster if I had help. Have refrigerator/freezer empty and unplugged, then you can take your time. Let new gasket lay flat for a day or two. Working great.

Paul, Manitowoc, WI

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

SLOW delivery
January 18, 2021

Perfect fit, easily installed but was on backorder 3 times. Meanwhile my freezer leaked cold air for 2 months.

Soapnurse, Hahira. GA

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend