$32.96 |Â
15% OFFÂ Phone Price : $38.96
CONFIRM THE PART FITS
Spiral Assembly 684-04108A-0629
Part #684-04108A-0629
Replaced by #684-04108A-0637
?
Manufacturer substitution
This part replaces 684-04108A-0629. Substitute parts can look different from the original.
Online Only Price
$88.48 |Â
6% OFFÂ Phone Price : $94.48
In Stock
For ZIP codes near Edit
Part Information
This auger (part number 684-04108A-0637) is for snowblowers.
Auger 684-04108A-0637 consists of rotating blades that collect snow and throw it from the auger housing and through the chute.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $101.45 |Â11% OFFÂ Phone Price : $113.45
- $2.91 |Â26% OFFÂ Phone Price : $3.91
- $2.99 |Â25% OFFÂ Phone Price : $3.99
- $19.56 |Â9% OFFÂ Phone Price : $21.56
- $21.16 |Â22% OFFÂ Phone Price : $27.16
- $74.45 |Â7% OFFÂ Phone Price : $80.45
- $64.52 |Â10% OFFÂ Was : $71.69
- $14.98 |Â12% OFFÂ Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247985380 Craftsman gas snowblower | 247985380 | Auger & housing |
| Model #31AH54SG793 MTD gas snowblower | 31AH54SG793 | Auger & housing |
| Model #31A-62BD799 MTD gas snowblower | 31A-62BD799 | Auger housing |
| Model #247887910 Craftsman gas snowblower | 247887910 | Auger/housing |
| Model #31AM62EE706 MTD gas snowblower | 31AM62EE706 | Auger & housing |
| Model #31BM62KE704 MTD gas snowblower | 31BM62KE704 | Auger & housing |
| Model #31AM63EF700 MTD gas snowblower | 31AM63EF700 | Auger & housing |
| Model #769-05284 MTD gas snowblower | 769-05284 | Auger & housing |
| Model #31AM62EE700 MTD gas snowblower | 31AM62EE700 | Auger & housing |
| Model #31AH64FG731 MTD gas snowblower | 31AH64FG731 | Auger & housing |
Reviews
I had some experience, so it was fairly easy.
I spent nearly 2 hours at it, but I spent the time to clean and lube some things while I had it apart. You need to separate the auger from the rest of the machine. Then you take the pulley off the back. You don't need a puller just a wrench. Then you take the 4 bolts that hold the bearings on sides out. then it pulls right out. Remove shear pin(s) slide auger blade(s) off the end of the shaft. Now put it all back together.
Bill L, Northwest Pennsylvania.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend