CONFIRM THE PART FITS
Part Information
This oven door hinge (part number WP8053807) is for ranges.
Oven door hinge WP8053807 attaches the left or right side of the door. The hinges on an oven door control the rate at which the door opens and also allow the door to stay open at an angle.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $63.08 |Â9% OFFÂ Phone Price : $69.08
- $105.27 |Â10% OFFÂ Phone Price : $117.27
- $66.23 |Â8% OFFÂ Phone Price : $72.23
- $9.09 |Â10% OFFÂ Phone Price : $10.09
- $248.09 |Â5% OFFÂ Phone Price : $260.09
- $58.75 |Â9% OFFÂ Phone Price : $64.75
- $37.80 |Â14% OFFÂ Phone Price : $43.80
- $35.33 |Â15% OFFÂ Phone Price : $41.33
- $67.46 |Â8% OFFÂ Phone Price : $73.46
- $6.60 |Â13% OFFÂ Phone Price : $7.60
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #YKERI204PW3 KitchenAid electric range | YKERI204PW3 | Door parts |
Model #RF389LXKQ0 Whirlpool electric range | RF389LXKQ0 | Door |
Model #RF389LXKT0 Whirlpool electric range | RF389LXKT0 | Door |
Model #RF389LXKB0 Whirlpool electric range | RF389LXKB0 | Door |
Model #SF369LEPT0 Whirlpool gas range | SF369LEPT0 | Door parts, optional parts |
Model #SF369LEPQ0 Whirlpool gas range | SF369LEPQ0 | Door parts, optional parts |
Model #WERP4110PS0 Whirlpool electric range | WERP4110PS0 | Door parts, miscellaneous parts |
Model #RF199LXKP0 Whirlpool electric range | RF199LXKP0 | Door |
Model #GERC4110PB1 Whirlpool electric range | GERC4110PB1 | Door parts, optional parts |
Model #WERP4210PQ1 Whirlpool electric range | WERP4210PQ1 | Door parts, optional parts |
Reviews
Quick and easy to instal
Took about 10 minutes to install and worked to fix the problem
The B, Starkville, MS
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
not too bad just pay attention
I think this is a universal hinge. It's about a 20 min Job however I had to drill two 9/16 hole one in each hinge at the top to receive the door handle the hinges were stamped but not drilled as were the OEM hinges glad I own a drill press after drilling hinges fit perfect.
Marine 1, Wilbraham MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Manufacturer defect in the parts.
We hired a repairman to install the hinges when we were informed that the hinges required alteration due to knock out not there.
[email protected], Garrison, NY
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Not quite the right part
This was supposed to be a direct replacement for my original oven door hinge but I had to make a minor modification to each hinge body where the oven door handle attaches through the hinge body to the door. There was only a small hole drilled there (maybe 1/8 inch) when what was required was really 1/2 inch. This required some drilling on my part. Fit perfectly once the holes were drilled.
Papaco, Pa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Had to drill out handle holes
Parts were exact except where the door handle interfaces with the hinge main bracket. Where there should have been a '5/8 hole, there was about '1/8 hole. Luckily, I had a stepped drill bit to open it up or I would have been really ticked. I would give better ratings if not for this.
Toops, Eden Prairie, MN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Ordered 2, 1 needed modified
I ordered 2 to replace on my oven but 1 came without a metal area drilled out. So I had to do that myself.
CakeM1x, Madison, WI
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Challenging to get trim back together
Trim was only hard part and there are a lot of variations on how kenmore oven doors are made. Little confusing
Dougdavis6, Maine
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour