Official GE space heater parts

Replacing the fan blade in a GE space heater

• Unplug the space heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
• Remove the fan cover mounting screws and pull the fan cover off.
• Disconnect the fan motor wiring harness.
• Remove the fan mounting screws and pull the fan out.
• Loose the fan blade set screw. Remove the fan blade from the motor shaft.
• Install the new fan blade on the fan motor shaft and tighten the fan blade set screw.
• Mount the fan in the fan housing. Connect the fan wire harness to the fan motor.
• Reinstall the fan cover and plug the fan power cord back into the electrical outlet to restore power to the fan.

Safety instructions for your GE space heater

• Carefully follow all installation instructions to properly and safely install the space heater in a suitable location.
• Only mount the heater in a vertical position. Don't attempt to mount the heater horizontally.
• Mount the heater at least 6-inches above the floor and no closer than 12-inches from the adjacent wall.
• Don't mount the heater over a bathtub or shower stall enclosure.
• Don't block the wall heater by mounting it under a towel rack or behind a door.
• Read and follow all operating and safety instructions in the owner's manual.