Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Sunbeam Top mount refrigerators

Official Sunbeam top-mount refrigerator parts

Sunbeam top-mount refrigerators enjoy a worthy reputation for dependability. Sunbeam top-mount refrigerators are also top performers in the refrigerator industry. Although Sunbeam top-mount refrigerators rarely break down, you may find that you need replacement parts from time to time. Sears PartsDirect has genuine Sunbeam replacement parts to keep your refrigerator running in top condition.

Parts that can fail in your Sunbeam top-mount refrigerator

  • Condenser fan. The condenser fan is in the machine compartment of the refrigerator next to the compressor. It moves air across the condenser coils to help cool the hot refrigerant coming out of the compressor. The refrigerant is cooled before it moves through the expansion device and into the evaporator.
  • Defrost bi-metal thermostat. The defrost bi-metal thermostat is a safety device attached to the evaporator coil. The defrost bi-metal thermostat shuts off the refrigerator defrost heater if the heater gets hot enough to damage the evaporator.
  • Electronic control board. The refrigerator electronic control board controls the major electro-mechanical components in your refrigerator. When the electronic control board senses the compressor needs to run to cool the refrigerator, it sends voltage to the compressor and fans. It then receives input from temperature sensors to monitor the temperatures inside the refrigerator and freezer sections. With this information, the electronic control board controls the defrost cycle.
  • Door gasket. The door gasket seals the gap between the door and cabinet to prevent warm air from leaking into the compartment.

Cleaning condenser coils on your Sunbeam top-mount refrigerator

  • Unplug the refrigerator or shut off the circuit breaker for the refrigerator.
  • To access the condenser coils, remove the bottom front toe grill. On many refrigerator models, you can pull the grill straight out and off of the refrigerator. Check your owner's manual for instructions for removing the front toe grill on your refrigerator. If the coils are under the refrigerator, remove the toe grill to access the coils.
  • Push a coil brush into the condenser coils under the refrigerator. The coil brush knocks the dust off of the condenser coils. Vacuum the area to pick up the dust. After knocking the dust from the coils with a coil brush, vacuum the dust.
  • Snap the bottom front toe grill onto the front of the refrigerator. Plug the refrigerator power cord back into the wall outlet.

Parts & More