Tandy makes CD players that are known for dependable sound reproduction. Playback of digital media through Tandy CD players is always crisp and clear. When your Tandy CD player breaks down, get the repair parts you need to fix the CD player at Sears PartsDirect.
Steps to take when the receiver or amplifier won't play your Tandy CD player's audio signal
Check the receiver or amplifier settings and select the correct audio input source on the receiver or amplifier if necessary.
Check the audio cable connections between the CD player and the receiver or amplifier. Reconnect any loose audio cable connections. Replace the audio cables if they're damaged.
Check the compact disc to make sure it's inserted in the tray properly. The label of the CD disc should be facing upward.
Check the compact disc media side for deposits or scratches. Clean the compact disc thoroughly if you find spills or deposits on the disc.
Reset the CD player control board by unplugging the CD player from the electrical wall outlet for several minutes. Plug the CD player power cord back in to the electrical outlet and attempt to play the compact disc again.
Top replacement parts for Tandy CD players
Drive belt. The drive belt spins the compact disc tray gears to extend and retract the tray for loading, removal and playback of compact discs.
CD deck assembly. The CD deck assembly contains the main components of the CD player, including the compact disc tray, disc drive motor and gears.
Main electronic control board. The main electronic control board governs the settings and functions of the CD player and powers the components inside the CD player.
Remote control. The remote control communicates control and setting selections to the CD player using RF (radio frequency) signal. The remote control allows you to operate the CD player and make setting selections from a remote location.
