Official Grass Masters electric lawn mower parts

Balancing the cutting blade on your Grass Masters electric walk-behind lawn mower

• Check the balance of the mower cutting blade after sharpening the blade. Replace the blade if it's damaged and can't be balanced.
• Clamp a nail or screwdriver with a round shank horizontally in a vice so the nail or screwdriver will support the weight of the blade.
• Place the center hold of the cutting blade over the nail or screwdriver's round shank.
• If either end of the blade rotates downward, file that end of the blade and recheck the balance.
• Continue to file the blade end until the blade rests horizontally and the end doesn't rotate downward.

Installing the grass catcher on your Grass Masters electric walk-behind lawn mower

• Release the bail handle to turn off the lawn mower. Wait until the cutting blade stops and remove the safety key.
• Reach down between the mower handle arms and raise the rear discharge door to the vertical position and hold the door up.
• Remove the mulch insert from the discharge chute.
• Grasp the grass catcher by its handle and connect the grass catcher to the rear of the mower deck.
• Release the rear discharge door.