Official Arctic Circle evaporative cooler parts

Replacing the pad in your ArcticCircle evaporative cooler

• Shut off the evaporative cooler and unplug the power cord or shut off the house circuit breaker for the cooler.
• Lift up the small roller ends to disconnect the 2 center rollers.
• Pull out the 2 small rollers.
• Pull out and turn the top roller bearing up to line up the slot.
• Lift the edge of the pad from under the guide and pull out the top roll end.
• Take out the pad bottom roller.
• Replace the pad and reassemble to cooler.

Cleaning your ArcticCircle evaporative cooler

• Disconnect electrical power by shutting off the house circuit breaker for the evaporative cooler or by unplugging the cooler.
• Remove the louvers.
• Connect a garden hose to the water tray drain fitting.
• Remove the overflow pipe from the tray.
• Drain water from the tray and clean the tray.
• Repeat the process for the other water tray.
• Replace the pads.
• Reassemble the evaporative cooler and restore electrical power.