Official Porter Cable painting power tool parts

Tips to follow when spraying paint with your Porter Cable painting power tool

• Wear proper protective equipment such as protective clothing, gloves, eye protection, and respiratory protection when using the painting power tool.
• Follow the instructions in the owner's manual for properly setting up and using the painting power tool.
• Hold the spray gun perpendicular to the surface with the spray gun tip about 12-inches from the surface when applying paint to avoid uneven paint application.
• Move the spray gun at a steady, even pace when applying paint.

Maintenance tips for your Porter Cable painting power tool

• Follow the proper shut-down procedure when you complete the painting project.
• Don't use oil-based solvents to clean the painting power tool after using it to apply latex paint. Use only warm, soapy water to clean the equipment after applying latex paint.
• Wipe inside of the suction filter housing with a rag. Clean the suction filter in a separate container of cleaning fluid or water and then reinsert the filter into the suction filter Housing.
• Spray 1 gallon of cleaning fluid or water through the spray gun.
• Remove the spray tip and clean the tip with a brush.
• Clean and dry the body of the painting power tool.