Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Husqvarna Rear tine tillers

Official Husqvarna rear-tine tiller parts

Husqvarna rear-tine tillers make it easy for you to turn the soil and add soil amendments to your garden for spring planting. If the wheels or tires on your Husqvarna rear-tine tiller won't turn, or the engine runs rough or won't start, find the replacement parts you need to fix the problem at Sears PartsDirect.

Frequently-replaced parts in Husqvarna rear-tine tillers

  • Clevis pins. The clevis pins are shear pins that couple the tines to the rotating tine shaft. A clevis pin is designed to shear off if the tines hit a fixed object during cultivation to prevent damage to the engine and other tiller components.
  • Spark plug. The spark plug provides the ignition spark for the engine cylinder.
  • Starter rope. The self-retracting starter rope coils around a spring-loaded pulley on the top of the crankshaft. The person operating the tiller pulls the starter rope, which rotates the spring-loaded pulley and spins the crankshaft to start the engine.
  • Carburetor. The carburetor mixes air with fuel in the proper proportion to produce a combustible gas. That gas/air mixture is pulled into the cylinder where the piston compresses it and the spark plug ignites it.

Troubleshooting your Husqvarna rear-tine tiller when its engine won't start

  • Check the fuel tank. Make sure the tank is filled with fresh gasoline. Old, stale gas won't start the engine.
  • Check the carburetor choke setting. Make sure you have the choke closed to start the engine.
  • Check the air filter. Clean or replace the air filter if it's dirty.
  • Check the spark plug wire. Make sure the spark plug wire is securely connected to the spark plug.

Parts & More