Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Dacor Bottom mount refrigerators

Official Dacor bottom-mount refrigerator parts

Dacor manufactures high-quality bottom-mount refrigerators that add style to your kitchen décor while keeping your food at the perfect temperature. Dacor bottom-mount refrigerators give you plenty of storage options and ample room to store foods. When your Dacor refrigerator needs repair, find the replacement parts you need at Sears PartsDirect.

Replacing the condenser fan motor in a Dacor bottom-mount refrigerator

  • Unplug the power cord from the wall outlet. Pull the refrigerator away from the wall.
  • Remove the screws from the rear compartment cover and then remove the cover.
  • Remove the front base screw from the fan motor bracket. Pivot the bracket toward the compressor and remove the rear bracket base screw. Tilt the fan motor bracket toward the condenser and remove the upper mounting screws that hold the condenser fan motor in the bracket. Tilt the motor bracket toward the compressor and remove the fan motor from the bracket. Unplug the fan motor wire harness and pull out the motor. Pull off the fan blade.
  • Install the fan blade on the new motor. Plug in the motor wire harness. Position the new motor on the motor bracket and reinstall the upper mounting screws. Reinstall the base bracket screws.
  • Position the rear compartment cover on the back of the refrigerator and reinstall the mounting screws. Plug in the refrigerator and push the refrigerator back into place.

Top-selling replacement parts for Dacor bottom-mount refrigerators

  • Ice maker assembly. The ice maker is a complete assembly that contains the ice mold and the control device. It plugs into a wire harness in the freezer or the ice compartment. The ice maker receives water from the inlet water valve and then holds the water in the ice mold until the water is frozen solid. It then automatically ejects the ice and refills to continue the process until the ice storage bucket is detected as full.
  • Light switch. The light switch turns the refrigerator light on and off and monitors door position. Replace the light switch if it doesn't work.
  • Compressor overload/PTC relay. The overload/PTC relay starts the compressor motor. It has 2 components: an overload protector that trips when the compressor motor overheats or locks up, and a relay. The relay completes the circuits to both the Start Windings and the Run Windings in the compressor motor. Once the motor is started, the relay de-energizes the Start Winding circuit so the compressor motor continues to run using just the run windings.
  • Thermistor. The thermistor is a temperature sensor within the refrigerator that sends information to the electronic control board.

Parts & More

Central Air Conditioner
York Central Air Conditioner Parts