Official Kmart gas line trimmer parts

Replacing the spark plug on your Kmart gas line trimmer

• Wear work gloves to protect your hands and work in a well-ventilated area.
• Disconnect the spark plug wire from the spark plug.
• Using a spark plug wrench, unthread and remove the spark plug from the engine cylinder. Don't let debris fall into the cylinder while you have the spark plug removed.
• Using a spark plug gap tool, set the spark plug gap according to the specification provided in your owner's manual for the line trimmer.
• Carefully thread the spark plug into the engine and tighten the spark plug firmly using the spark plug wrench.
• Connect the spark plug wire to the spark plug.

How to troubleshoot your Kmart gas line trimmer when it runs rough

If the fuel has been in the tank unused for months, it can pick up moisture and fail to ignite (that's why you should drain the fuel before storing for the winter or add fuel stabilizer to the tank). Replace the fuel with fresh gas if it's old and untreated with stabilizer. You might also need to replace the fuel filter at the same time. Performing preventive maintenance including a line trimmer tune-up will also help the engine run smoothly.

Check the fuel lines for cracks and replace them if necessary. If you still have problems after checking those issues, consider replacing or rebuilding the carburetor.