Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Scotsman Freestanding ice makers

Official Scotsman freestanding ice maker parts

Scotsman freestanding ice makers deliver a large volume of ice so you're never without ice cubes. Innovative controls on Scotsman freestanding ice makers help produce ice efficiently and quickly. When your Scotsman ice maker isn't producing the ice that it should, get the repair parts you need to fix the problem at Sears PartsDirect.

Showing 1-4 of 4
Scotsman CU3030SA1A commercial icemaker
0 parts
Scotsman DCE33 ice machine
15 parts
Scotsman CSW45A1D ice maker
126 parts
Scotsman CSW45PA1D ice maker
131 parts
Showing 1-4 of 4
Back to top

Cleaning your Scotsman freestanding ice maker with cleaning solution

  • Order the ice maker cleaning solution for your freestanding ice maker.
  • To begin the cleaning process, press the On/Off button on your ice maker. Wait for 5 to 10 minutes for the ice to fall into the storage bin then remove all ice from the storage bin.
  • Unscrew the drain cap from the bottom of the water pan and drain all water from the water pan.
  • Reinstall the drain cap on the water pan.
  • Pour the cleaning solution into the water pan then dilute the solution with 2 bottles of water.
  • Press the Clean button to start the cleaning cycle.
  • After the clean cycle, check for cleaning solution in the water pan. Repeat the clean cycle if cleaning solution remains in the water pan after the cleaning cyle.
  • Press the On/Off button to resume ice production after cleaning is complete.

Scotsman freestanding ice maker common repair parts

  • Transformer. The transformer converts 120 volt AC power to low-voltage DC power. The low voltage DC power is used to heat the cutting grid wires that cut the slab of ice into cubes.
  • Water inlet valve. The water valve fills the water reservoir during the ice-making process to replenish the water that freezes to form the slab of ice on the evaporator plate.
  • Switch assembly. The switch assembly houses the selection buttons on the control panel. The switch assembly is connected to the electronic control board through a wire harness.
  • Cleaning solution. Ice maker cleaning solution removes mineral deposits from the evaporator plate and water tubes. Use ice maker cleaning solution when you run the cleaning cycle on your ice maker.

Parts & More