CONFIRM THE PART FITS

Snowblower Scraper Blade 1738335AYP

Part #1738335AYP

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Part Information

This scraper blade (part number 1738335AYP) is for snowblowers.

Scraper blade 1738335AYP attaches to the bottom of the auger housing to protect the housing and augers.

Wear work gloves to protect your hands when installing this part.

Reviews

perfect replacement
February 08, 2022

Fit perfect and was simple to install. Identical to original part.

Chris, Toledo, Ohio

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Simple job, but should have been easier
March 14, 2021

The job was simple, only 4 carriage bolts hold the bar in place. But I my case, the nuts were badly worn from dragging on the ground and I had to grind them down to get them off without damaging the sheet metal of the housing. It too k about 45 minutes to grind off three nuts. One other point. These parts are way overpriced. The carriage bolts were almost $3.00 each for a bolt that cost 19 cents at Home Depot. The scraper bar, just a flat piece of metal 24' wide nearly $40 and the height adjusting skids, a stamped piece of metal that absorbs the wear of rubbing on the ground $33 each, so $66 as there are two.

Rich, Long valley

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

did not place on yet looks ok
February 16, 2021

replace blade and pins on snowblower have nothing else to say

Firefighter119, Tarrytown NY

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Example: Easy to install...... yep!
November 23, 2018

Example: Easy to install. Only took 20 minutes......yep! +/-

Yep!, Undisclosed

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour