$11.11 |Â
15% OFFÂ Phone Price : $13.11
CONFIRM THE PART FITS
Part Information
This ice maker ice mold (part number 3390JA1150A) is for refrigerators.
Ice maker ice mold 3390JA1150A holds the water in the ice maker assembly during the ice-making process.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $113.93 |Â10% OFFÂ Phone Price : $125.93
- $20.38 |Â23% OFFÂ Phone Price : $26.38
- $284.76 |Â$12.00 OFFÂ Phone Price : $296.76
- $70.77 |Â8% OFFÂ Phone Price : $76.77
- $64.44
- $263.19 |Â$12.00 OFFÂ Phone Price : $275.19
- $287.24 |Â$12.00 OFFÂ Phone Price : $299.24
- $128.48 |Â9% OFFÂ Phone Price : $140.48
- $85.13 |Â7% OFFÂ Phone Price : $91.13
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LRSCS21935TT LG side-by-side refrigerator | LRSCS21935TT | Ice/water parts |
| Model #LSC27921SB03 LG side-by-side refrigerator | LSC27921SB03 | Ice and water parts |
| Model #LSC27921SB05 LG side-by-side refrigerator | LSC27921SB05 | Ice and water parts |
| Model #LRSC21934SW LG side-by-side refrigerator | LRSC21934SW | Ice & water |
| Model #LSC27921ST/03 LG side-by-side refrigerator | LSC27921ST/03 | |
| Model #LRSC21951ST LG side-by-side refrigerator | LRSC21951ST | Ice & water |
| Model #LSC269905TT LG side-by-side refrigerator | LSC269905TT | Ice & water parts |
| Model #LRSC21935SB LG side-by-side refrigerator | LRSC21935SB | Ice & water |
| Model #LRSC26915TT LG side-by-side refrigerator | LRSC26915TT | Ice & water part |
| Model #79531006700 Kenmore side-by-side refrigerator | 79531006700 | Ice/water parts |
Reviews
SENSOR COVER MOUNTS WERE BENT
Must have been crushed in storage and/or shipping. The two little tabs that hold the sensor cover pins were crushed almost flat. I had to take a heat gun and straighten them out. (I was afraid they would break if I tried to straighten them at room temp.) I didn't want to waste time waiting for a replacement. Luckily it works fine. I did not think to get a photo.
knds368, Lake Mary, FL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
ICE no longer sticks in the tray
Was straightforward to install, works well. Ice releases from tray and water no longer over flows into the ice bin.
Gordon, Houston Tx
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Simple and easy to install
It was simple to install. A lot cheaper than buying a whole new ice maker unit. Great quality.
Charles M, Atlanta Ga
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Ice cube tray.
Perfect replacement tray. Fixed problem of cubes not ejecting. Not hard to replace, but no directions. Took a leap of faith to find the two screws needed to pull out the icemaker.
Wayneoo, New Bern NC
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Improved part.
Not only was this part easy to install it was also an improved version that had a splash guard thus preventing water from getting into the the ice holding bucket causing the ice cubes to stick together.
Ed-of-EP, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Very easy to install
Very simple fix. Exactly the correct part. Need to include instructions with parts. There is a tiny reset hole that resets the tray after installation and it located on right side of unit where ice tray connects to small square box. Look under the little square box for reset hole and use paper clip or something similar to reset. Ice tray will immediately start to rotate and then fill. You are set.
Sundancer10, Illinois
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Exact fit
Easy install less than 5 minutes exact fit works perfect.
Joseph S, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
perfect fit
Newer updated version solves the water overflow problem icing up all the time ...fits perfectly very easy to install no tools needed.
Do i u, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes