We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part.
Although our call center staff is always happy to help when possible, they don't have access to this part.
If you can't find that part and decide to replace the product, we invite you to visit www.sears.com
Broke the old spring because it was 32 years old. It broke during a snow storm. Ordered two,one for now and one for when this one goes.
Ease of InstallationEasy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Easy to Install
December 20, 2020|CaptainCarl, Howell, New Jersey
Replaced snowblower ground drive idler spring which was broken. this spring allows idler pulley and belt to engage the ground drive. Broken or missing spring then the wheels do not move forward!
Ease of InstallationEasy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Installed in about 15 minutes. So easy!
September 29, 2019|Roxanne, Dundee, IL
Installed ground drive idler spring. It helped that we already had the snowblower apart and just needed to install the spring.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Broken wheel drive Idler Spring
January 24, 2018|Tobttin, Lockport, NY
Wheels wouldn't drive, found belt tentioner idler spring rusted out/broken. Simpley installed new spring, reinstalled belt cover, 15 min. job.
Ease of InstallationEasy
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Small spring
March 04, 2021|Jackpot, Bethlehem, pa
The shipping costs for a small $6.00 spring was $8.99 , which is ridiculous!
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Not a good replacement part
January 01, 2021|Ben10, New York
This 'replacement' part is not of the same design as the original which when installed is too close to the drive belt. It should have an extended hook like the original. Don't know if it will hold up or cause damage to the belt over time.
This part is no longer available.
verified customer