$21.62 |Â
22% OFFÂ Phone Price : $27.62
CONFIRM THE PART FITS
Washer Door Boot MDS47123604
Part #MDS47123604
Online Price
$121.86 |Â
10% OFFÂ Was : $135.39
In Stock
For ZIP codes near Edit
This part fits
Part Information
Washer door boot MDS47123604 is an original equipment manufacturer (OEM) part that fits some front-load washers in these series: Kenmore Elite 796; and LG WM336 and WM355.
Door boot MDS47123604 forms a seal between the wash tub and the door, preventing leaks.
Spring clamps attach the door boot to the front panel on one side and the washer tub on the other. Open the washer door, remove the outer spring clamp and then pull off the washer front panel to remove the door boot from the tub.
Frequently Used Together
- $107.15 |Â10% OFFÂ Phone Price : $119.15
- $225.00 |Â5% OFFÂ Phone Price : $237.00
- $6.56 |Â13% OFFÂ Phone Price : $7.56
- $17.25 |Â10% OFFÂ Phone Price : $19.25
- $264.84 |Â$12.00 OFFÂ Phone Price : $276.84
- $15.60 |Â11% OFFÂ Phone Price : $17.60
- $394.27
- $204.24 |Â6% OFFÂ Phone Price : $216.24
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #79641542210 Kenmore Elite washer | 79641542210 | All parts |
| Model #79641549210 Kenmore Elite washer | 79641549210 | All parts |
| Model #79641542110 Kenmore Elite washer | 79641542110 | Drum and tub assembly parts |
| Model #79641548110 Kenmore Elite washer | 79641548110 | Drum and tub assembly parts |
| Model #79641549110 Kenmore Elite washer | 79641549110 | Drum and tub assembly parts |
| Model #79641548210 Kenmore Elite washer | 79641548210 | All parts |
| Model #WM3360HWCA LG washer | WM3360HWCA | Drum and tub assembly parts |
| Model #WM3550HWCA LG washer | WM3550HWCA | Drum and tub assembly parts |
| Model #WM3550HVCA LG washer | WM3550HVCA | Drum and tub assembly parts |
| Model #WM3360HVCA LG washer | WM3360HVCA | Drum and tub assembly parts |
Reviews
Works now'
Very difficult to install, there are two springs (inner and outer) that need to be removed and put back on when changing it out. The outer spring need a special tool ($20) but the inner spring also needs a special tool which I could not seem to find. Long story short, after about two hours of messing around with other tools I finally got it back on. There are a few videos out there on replacing it but none of them seem to capture this stupid design. It obviously needs the spring to make it water tight but they could of just used a different non-tool specific one'
Brett, Baltimore, MD
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Great Customer Service
Customer Service was outstanding. The sales person helped me find the exact part I needed for my washer and it was shipped out immediately. Very pleased.
Undisclosed, Pa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Probably requires a professional
Had Sear's technician do it and it took well over an hour.
RCap, MA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Not as easy to install as the video...
The video makes it look way too...easy. The guy practically tosses it into place like a frisbee....No. Can you do it?...yes. Is it easy?....meh. Take pictures of what that boot looks like before you remove the two metal retaining bands (outer / inner)...know how they go back on. Pay attention to how the inside rubber lip of the door boot is flush against the plastic outer tub...that is the key to correctly sealing the door boot system and getting the inner retaining band in place without that special tool is a nightmare...doable...but have a tourniquet handy for the finger you're about to take a plug out of with that pair of vise grip pliers you are tugging on! If the inside seal looks any different from flush...you've done it wrong and get a shopvac ready to vacuum up several gallons of water from your laundry room floor. Ask me how I know....find the right groove to press the inner boot onto and you'll get it to look flush like in the video.
DieHardDIYer, Madison, Alabama
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Perfect fit.
Not as easy as I thought. Looks easy but you have to be carefull to align the top and bottom so that it drains properly. Also the springs that hold the gasket were challenging to secure.
Cesarc47, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Very Difficult to install need lg's tools!
Hard to take put back on the inner and outer rings with springs that hold this gasket in and make water tight seal. 2 different tools for 2 different springs. the tools cost me $155. You can also take your old moldy gasket, put it in a bucket with a gallon of bleach and water for 24hrs, comes out like brand new.
brooklynron, easton, pa
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Unable to install
Had to order a tool from amazon to stretch the wire. Waiting for the tool to come.
kgimbutas, Newark, DE
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Simple installation
Old gasket developed leak from drain clamp. Installation took about thirty minutes. Repositioned clamp and taped sharp edges.
Tigger, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour