Gas Grill Firebox Heat Shield G352-1000-W1
Part #G352-1000-W1
Part Information
This firebox heat shield (part number G352-1000-W1) is for gas grills.
Firebox heat shield G352-1000-W1 attaches to the frame and serves as a heat barrier between the firebox and the propane tank.
Follow the instructions in your owner's manual when installing this part.
Reviews
Worked with modifications .. Happy
I love my Red's BBQ, allows BBQ meats with smoke and NO flare ups. BUT the FireBox heatshield take the wear.... The replacement Firebox was great except the Alignment pins were too large for the existing holes in the BBA.. Only took about 5 minutes to drill the holes larger.... Works great and should last another few years now... Happy with the purchase... - Bob -
Bob G, California
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part looks great, on time, did not fit grill!!!
Part # G352-1000-W1 measured 17 1/2" x 17 1/4". Part needed measured 17 1/2" x 15 1/4" Ordered per Char-Broil/ Masterbuilt part #. Returning to Parts Direct.
Andy, Harrisburg, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Specs don't match original part from Char-Broil
The four legs of this item are slightly larger than the original part and they don't fit the holes on the firebox where they are supposed to be inserted. I have to drill the holes to make them bigger in order to fit this part.
Undisclosed, Vienna, VA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Worth the wait.
Takes forever to get the part once ordered. However, considering the part couldn't be found anywhere else in stock. I can't complain too much.
E L, Drums, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Took me around 5 min to be done with out any tools
Alex100000, San Antonio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
The right part for the job
It was the cheapest price I could find and the right part for an older grill. Works great and simple to install.
Patrick88, West Bend WI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
was damaged and more importantly didn't fit
The part arrived with minor damage (dent) but, more importantly, it was slightly wrong size: about half an inch too short on width and depth (so it didn't sith on the grill's ledge) and about the same half an in too tall so that the bottom touched the burners and the top was too high to place the girdles.
Lesha, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Easy swap, my grill has a new life!
Just remove the existing grates and worn--out shield and replace with the new one. My old shield had holes in it that allowed the flames to shoot up and scorch the food. Renewed a 5 year old grill to work like new. I accidentally ordered the wrong part from a different site, it was the firebox itself which requires a significant amount of work to replace. (I kept it as it could use a new one but not immediately.) Received the replacement part from Sears Direct very quickly, and they had a better price than other popular replacement appliance parts sites.
MichelleJW, Northern IL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes