This dispenser auger (part number WP2198574) is for refrigerators.
Dispenser auger WP2198574 rotates to push the ice from the ice container into the dispenser chute.
Wear work gloves to protect your hands when installing this part.
Frequently Bought Together
We have 15,000+ available parts
Refrigerator Screw
Part #WP8281164
In Stock
$7.82
11% OFF Phone Price : $8.82
Qty
Refrigerator Auger Motor Drive Shaft
Part #WP2188917
In Stock
$69.41
8% OFF Phone Price : $75.41
Qty
Refrigerator Ice Bin
Part #WP2258236
In Stock
$246.41
5% OFF Phone Price : $258.41
Qty
Refrigerator Ice Crusher Coupler
Part #WP2188918
Replaced by #W11629923
Manufacturer substitution
This part replaces WP2188918. Substitute parts can look different from the original.
In Stock
$50.38
Qty
Whirlpool Refrigerator Ice Maker Assembly
Part #2198597
In Stock
$106.88
10% OFF Phone Price : $118.88
Qty
Refrigerator Auger Motor Cover
Part #WP2256154
In Stock
$59.56
Qty
Reviews
0 Reviews
Quick and easy install
March 28, 2018|Mike994, Stone Mountain, GA
Took more to empty the ice container than to change the parts. The ice dispenser coupler had broken in half. When I checked the dispenser I noticed the auger did not remain straight. it wobbled as it turned. I ordered both items. Once I received the items, I set aside 2 hours to get it done. Once I unscrewed the retaining screw and the plate, I was able to remove the auger. I removed the blades and placed them on the table in line. I installed the blades on the new auger and reinstalled them in the dispenser. Once I made sure everything was correct, reinstalled the washer and the new coupled, replaced the screws on the plate and the auger. I reinstalled the dispenser, turned on the icemaker. Half an hour. that's it.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
1 person thought this review was helpful.
Not the same auger design
May 23, 2018|Rens, Manassas, va
The design of the auger is diiferent. The auger is higher than the original and does not make the ice dispense. It is much smaller than the original. It is an easy install, but does not work.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Not the same as original
June 08, 2021|bac42, Chester, New York
This part is different. The original had a near right angle bend close to the bottom which stirs the ice at the bottom of the bucket. The replacement has about a 45 degree bend, which leaves the ice at the bottom unstirred, so the ice tends to freeze into a block.
verified customer